Connections
Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. Refer to the operating instructions for the component to be connected.
Connect the power cord after all the connections between devices have been completed. Be sure to use the included power cord.
Rear panel
| 1 |
| 2 | 3 | 456 | 4 | 6 | 453 | 4 |
|
| ||
For Europe |
|
|
| CH 4 | CH 3 | CH 2 |
| CH 1 |
|
| |||
|
|
|
| PHONO | CD/LINE | LINE | CD/LINE | LINE | CD/LINE | PHONO CD/LINE |
|
| |
|
|
| RETURN |
| L |
| L |
| L |
| L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| OFF POWER | R | L(MONO) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| SIGNAL GND |
|
| SIGNAL GND |
|
|
| |||
| ON |
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| R |
| R |
| R |
| R |
|
|
|
|
|
|
| MASTER1 |
| MASTER2 | REC OUT | BOOTH |
| DIGITAL | CONTROL | |
For North America |
|
| SEND |
| R | L | L | L |
|
| MASTER OUT |
|
|
|
| R | L(MONO) |
|
|
|
|
| R | L |
| CH3 | CH2 |
|
|
|
|
|
|
|
|
|
| ||||
| AC IN |
|
|
|
|
| R | R |
|
|
|
|
|
|
|
|
| 1GND | 2 HOT |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
| 3 COLD |
|
|
|
|
|
|
|
| f |
| e |
| d |
| c | b | a |
| 9 | 8 | 7 |
1POWER button (page 12)
Turns this unit’s power on and off.
9DIGITAL MASTER OUT terminal (page 5)
Outputs the master channel audio signals.
2RETURN terminals (page 5)
Connect to the output terminal of an external effector. When the [L (MONO)] channel only is connected, the [L (MONO)] channel input is simultaneously input to the [R] channel.
3PHONO terminals (page 5)
Connect to a phono level (MM cartridge) output device. Do not input line level signals.
To connect a device to the [PHONO] terminals, remove the short- circuit pin plug inserted in the terminals.
Insert this
4CD/LINE terminals (page 5)
Connect to a DJ player or a line level output component.
5SIGNAL GND terminal (page 5)
Connects an analog player’s ground wire here. This helps reduce noise when the analog player is connected.
6LINE terminals (page 5)
Connect to a cassette deck or a line level output component.
7Kensington security slot
8CONTROL terminal (page 5)
This is a Ø 3.5 mm mini phone jack type DJ player control terminal. If you connect a Pioneer DJ player using a control cable (supplied with a DJ player), you can start playback of control other operations of the DJ player with the fader of this unit.
ABOOTH terminals (page 5)
These are output terminals for a booth monitor.
BREC OUT terminals (page 5)
These are output terminals for recording.
CMASTER2 terminals (page 5)
Connect to a power amplifier, etc.
DMASTER1 terminals (page 5)
Connect to a power amplifier, etc.
Be sure to use these as balanced outputs. Be careful not to accidentally insert the power cord of another unit.
ESEND terminals (page 5)
Connect to the input terminal of an external effector. When the [L (MONO)] channel only is connected, a monaural audio signal is output.
FAC IN
Connects to a power outlet using the included power cord. Wait until all connections between the equipment are completed before connecting the power cord.
Be sure to use the included power cord.
WARNING
The
4En