Problem

Check

Remedy

 

 

 

Sound of a computer cannot be output from this unit.

Are this unit and computer properly connected?

Connect this unit and the computer directly using the included USB cable. (page

 

6)

Are the audio output device settings properly set?

Select this unit with the audio output device settings. For instructions on making

 

settings for your application, see your application’s operating instructions.

Is the input selector switch set to the proper position?

Set the input selector switch to the [USB */*] position. (Page 12)

Effect sound cannot be monitored

—

For [ECHO], [SPIRAL], [REVERB], [ROLL], [SLIP ROLL], [REV ROLL] and

even when the [CUE] button for [BEAT

 

[VINYL BRAKE], when the effect is off, the effect sound cannot be monitored.

EFFECTS] is pressed.

 

This is not a malfunction.

Sound is distorted when an analog

Have you connected an analog player with a built-

For analog players with built-in phono equalizers, connect the player to the [CD/

player is connected to this unit’s

in phono equalizer?

LINE] or [LINE] terminals. (page 5)

[PHONO] terminals.

 

 

 

If the analog player with built-in phono equalizer has a PHONO/LINE selector

Or, lighting of the channel level

 

 

switch, switch it to PHONO.

indicator does not change even when

 

 

 

Is an audio interface for computers connected

If the audio interface for computers has a line level output, connect it to the [CD/

the [TRIM] control is turned.

between the analog player and this unit?

LINE] or [LINE] terminal. (page 5)

 

 

 

 

 

 

If the analog player has a PHONO/LINE selector switch, switch it to PHONO.

information Additional

En 23