Pioneer DJM-750 manual 20

Category		SW Name		SW Type	MIDI assignment	Trigger/Toggle	Transmitted data
			DELAY	Switch	CC 042	2	OFF=0, ON=127
			ECHO	Switch	CC 055	2	OFF=0, ON=127
			SPIRAL	Switch	CC 043	2	OFF=0, ON=127
			REVERB	Switch	CC 054	2	OFF=0, ON=127
			TRANS	Switch	CC 053	2	OFF=0, ON=127
			FILTER	Switch	CC 059	2	OFF=0, ON=127
			FLANGER	Switch	CC 050	2	OFF=0, ON=127
			PHASER	Switch	CC 057	2	OFF=0, ON=127
			ROBOT	Switch	CC 051	2	OFF=0, ON=127
			VINYL	Switch	CC 061	2	OFF=0, ON=127
			BRAKE
	EFFECT		SLIP	Switch	CC 058	2	OFF=0, ON=127
			ROLL
	SELECT
			ROLL	Switch	CC 046	2	OFF=0, ON=127
			REV	Switch	CC 047	2	OFF=0, ON=127
			ROLL
			SND/RTN	Switch	CC 062	2	OFF=0, ON=127
			CH1	Switch	CC 034	2	OFF=0, ON=127
			CH2	Switch	CC 035	2	OFF=0, ON=127
BEAT EFFECTS
			CH3	Switch	CC 036	2	OFF=0, ON=127
			CH4	Switch	CC 037	2	OFF=0, ON=127
			MIC	Switch	CC 038	2	OFF=0, ON=127
			CF.A	Switch	CC 039	2	OFF=0, ON=127
			CF.B	Switch	CC 040	2	OFF=0, ON=127
			MASTER	Switch	CC 041	2	OFF=0, ON=127
				Switch	CC 013	—	—
							TIME value (When FLANGER,
	TIME						PHASER, FILTER or VINYL BRAKE
				Switch	CC 045	—	is selected, the value is halved.
							When a negative value is selected,
							it is set to a positive value.)
	LEVEL/DEPTH			Switch	CC 091	—	0-127
	ON/OFF
	!	When an effect
		other than [SND/		Button	CC 114	—	OFF=0, ON=127
		RTN] is selected
		at BEAT EFFECT
	ON/OFF
	!	When [SND/		Button	CC 064	—	OFF=0, ON=127
		RTN] is selected
		at BEAT EFFECT
			NOISE	Button	CC 085	Trigger/Toggle1	OFF=0, ON=127
	EFFECT		JET	Button	CC 084	Trigger/Toggle1	OFF=0, ON=127
SOUND COLOR FX	SELECT		CRUSH	Button	CC 086	Trigger/Toggle1	OFF=0, ON=127
(BOOST COLOR FX)			FILTER	Button	CC 087	Trigger/Toggle1	OFF=0, ON=127
	BOOST			Button	CC 100	Trigger/Toggle	OFF=0, ON=127
	EFFECT KNOB			Control	CC 005	—	0-127
MIC	HI			Control	CC 030	—	0-127
	LOW			Control	CC 031	—	0-127
Fader Start	FADER START CH-2			Button	CC 089	Trigger/Toggle	OFF=0, ON=127
	FADER START CH-3			Button	CC 090	Trigger/Toggle	OFF=0, ON=127
HEADPHONES	MIXING			Control	CC 027	—	0-127
	LEVEL			Control	CC 026	—	0-127
	Timing Clock			—	Timing Clock	—	—
Fader Start	FADER START CH-2				Note 103	—	BACK CUE = 0, PLAY = 127
	FADER START CH-3				Note 104	—	BACK CUE = 0, PLAY = 127
MIDI	START			Button	START	—	—
	STOP			Button	STOP	—	—

1When turning one button on switches another button from on to off, MIDI on and off messages are sent from the two buttons. When there is no button that switches off, only the MIDI on message is sent from the button that was pressed.

2When switched from one position to another position, the MIDI ON and OFF signals are sent respectively from both positions.

!When the [START/STOP] button is pressed for over 1 second, MIDI messages corresponding to the positions of the buttons, faders and controls are sent in a bundle (Snapshot).

The MIDI Snapshot sends all MIDI messages other than MIDI start and MIDI stop.

20En