04Basic playback controls
The table below shows the basic controls on the remote for playing discs. The following chapter covers other playback features in more detail.
Button | What it does |
PLAY | Starts playback. |
| If the display shows RESUME |
| or LAST MEM playback starts |
| from the resume or last |
| memory point (see also |
| Resume and Last Memory |
| below.) |
PAUSE Pauses a disc that’s playing, or restarts a paused disc.
STOP | Stops playback. |
| See also Resume and Last |
| Memory below. |
Press to start fast reverse
(remote only) scanning. Press PLAY to resume normal playback.
Press to start fast forward
(remote only) scanning. Press PLAY to resume normal playback.
PREV Skips to the start of the current track, title or chapter, then to previous tracks/titles/chapters.
NEXT Skips to the next track, title or chapter.
Numbers Use to enter a title/chapter/ (remote only) track number. Press ENTER to
select.
•If the disc is stopped, playback starts from the selected title (for DVD) or track (for CD/Video CD/Super VCD).
•If the disc is playing, playback jumps to the start of the selected title (VR mode
Resume and Last Memory
When you stop playback of a DVD, CD, or Video CD/Super VCD or DivX video/WMV discs, RESUME is shown in the display indicating that you can resume playback again from that point.
If the disc tray is not opened, the next time you start playback the display shows RESUME and playback resumes from the resume point. (If you want to clear the resume point, press
STOP while RESUME is displayed.)
With DVDs and Video CD/Super VCDs, if you take the disc out of the player after stopping playback, the last play position is stored in memory. If the next disc you load is the same one, the display shows LAST MEM and playback will resume. For
Note
•The Last Memory function doesn’t work with VR format
•If you don’t need the Last Memory function when you stop a disc, you can press
OPEN/CLOSE to stop playback and open the disc tray.
20
En
