Audio Connections
This player features two digital (optical and coaxial) and also analog audio output formats.
Digital Audio Connections:
You can enjoy the digital audio recorded on DVD discs from both optical digital and coaxial digital output jacks.
When making digital audio connections, do not make connections from both the coaxial and optical digital outputs to the same component.
When a DVD recorded in Dolby Digital, DTS, or MPEG is loaded, noise will be output if you have made connections via the digital audio jacks to a receiver or amplifier that cannot decode a Dolby Digital, DTS, or MPEG digital bitstream. In this case, be sure to set up the Setup Navigator audio settings to best reflect the type of system you are using (page 19) Additionally, the digital audio settings can be adjusted manually in the Setup screen Audio 1 menu (page
DIGITAL OUT (Optical)
The digital signal is transmitted as light pulses through a
•Use to connect to an AV amplifier or receiver with
•Use a
AC IN |
DIGITAL
OUT
OPT
DIGITAL IN
AV amplifier or receiver with
DIGITAL OUT (Coaxial)
The digital signal is transmitted electronically through a coaxial cable.
•Use to connect to an AV amplifier or receiver with
•Use a coaxial cable (not supplied) to connect the DIGITAL OUT (coaxial digital output) on the player to the coaxial digital input on an AV amplifier or receiver.
AC IN |
| DIGITAL OUT | MAKING |
DIGITALL ININ |
| CONNECTIONS |
|
|
AV amplifier or receiver with
Analog Audio Connection:
AUDIO OUT
•Make analog audio connections to a stereo amplifier or receiver.
•Analog audio connections can also be made to a TV or monitor with stereo input jacks.
•Use the supplied audio cord to connect the AUDIO OUT on the player to the audio input on the stereo amplifier or receiver.
•When making analog audio connections, be sure to match the color of the plugs with the color of the jacks (red and white).
AC IN |
RL AUDIO OUT
AUDIO IN
RL
Stereo amplifier or receiver
15
