08Initial Settings menu
HDMI output with
The way audio sources are output from the HDMI terminal depends on the specification of the connected component.
Component specification
SACD, DVD-Audio and
5.1 channel compatible on HDMI*1 Component/output
5.1 channel compatible on HDMI*1
DVD-Audio and
2 channel compatible on HDMI*1
Incompatible with
Example | Disc Format | SACD | ||
Component | 2 ch | 5.1 ch | Auto (DSD) | |
2 ch | 5.1 ch*2 | DSD 2ch/5.1 ch | ||
2 ch | 5.1 ch*2 | No sound | ||
|
| |||
|
|
| ||
2 ch | Left/Right or | No sound | ||
2 ch downmix*3 | ||||
| ||||
No sound*4 | No sound*4 | No sound | ||
|
|
| ||
|
|
|
|
*1 This unit checks the specification of the connected component (such sample rate/multi- channel limitations and compatibility with protected audio contents) and outputs the signal accordingly. Note that
*2 If HDMI Out setting (page 39) is set to LPCM (2CH),
If the video output resolution is 480i or 480p audio output may be limited to 2 channel (depending to the connected component).
*3 In cases where the source is
*4 If CPPM shows in the front panel display, it means it is not possible to output CPPM copycon- trolled
48
En