Pioneer DV-48AV Connections Connecting using HDMI, Use an HDMI cable to connect the

Connections

Connecting using HDMI

If you have a HDMI equipped monitor or display, you can connect it to this player using a commercially available HDMI cable.

The HDMI connector outputs uncompressed digital video, as well as almost every kind of digital audio that the player is compatible with, including DVD-Video, DVD-Audio (see below for limitations), SACD, Video CD, CD, WMA, MP3, MPEG-4 AAC, DivX video and WMV.

•Use an HDMI cable to connect the

HDMI OUT interconnect on this player to an HDMI interconnect on a HDMI- compatible display.

To HDMI interconnect

HDMI-compatible display

VIDEO OUT		C	L
PB	SL

	PR	Y		SR	SW	R
HDMI OUT	COMPONENT VIDEO OUT		S-VIDEO OUT	AUDIO OUT (5.1ch)

The arrow on the cable connector body should be face up for correct alignment with the connector on the player.

02

Note

•This unit has been designed to be compliant with HDMI (High-Definition Multimedia Interface). Depending on the component you have connected, using a DVI connection may result in unreliable signal transfers.

•When you change the component connected to the HDMI output, you will also need to change the HDMI settings to match the new component (see HDMI Out on page 39, HDMI Resolution and HDMI Color on page 40 to do this). However, the settings for each component are then stored in memory (for up to 2 components).

•The HDMI connection is compatible with 2 channel linear PCM signals (44.1 kHz to 192 kHz, 16 bit/20 bit/24 bit), and Dolby Digital, DTS, MPEG audio bitstream, multi channel DSD, and multi channel linear PCM signals, (5.1 channel signals up to 96 kHz, 16 bit/20 bit/24 bit).

15

En