Installation
The PD7170 ships with various types of AC power cords. Choose the one that is appropriate to your locale.
Plug the female end of the power cord into the AC receptacle on the rear of the projector (AC 100V ~ 240V); see Figure
1. Turn on your source components.
ON
2. Press the ON l button on the remote control to turn on the PD7170. The LED flashes green to indicate that it is warming up.
3. When the projector is ready for use, the LED turns off.
The PD7170 gives you a great deal of control over the picture size, position and focus.
To access the motorized lens focus control, do either of the following:
•Press MENU on the remote control. Select Control from the Main Menu, then press 
or 
to highlight Lens Control. Press 
or 
to highlight Focus and press ENTER.
•When no menu is present 
) on the system keypad or remote control unit.
Then, use the 
button to focus the projected image nearer or the 
button to focus the projected image farther away.
To access the motorized lens zoom control, do either of the following:
•Press MENU on the remote control. Select Control from the Main Menu, then press 
or 
to highlight Lens Control. Press 
or 
to highlight Zoom and press ENTER.
•When no menu is present 
) on the system keypad or remote control unit twice.
Then, use the 
button to make the picture larger (zoom in) or the 
button to make the picture smaller (zoom out).
To access the motorized lens shift control, do either of the following:
•Press MENU on the remote control. Select Control from the Main Menu, then press 
or 
to highlight Lens Control. Press 
or 
to highlight Lens Shift and press ENTER.
•When no menu is present 
) on the system keypad or remote control unit three times.
Then, use the 
and 
buttons to adjust the vertical lens position or the 
and 
buttons to adjust the horizontal lens position.
Connecting to AC Power
3.7
Turning on the Power
3.8
Lens Adjustments
Focus
Zoom
Lens Shift
Planar PD7170 Installation/Operation Manual | 31 |
