Operation
•
Video Standard: Select Video Standard from the Advanced menu to specify the color system for composite video or
Different countries use different formats for video signals. Select the appropriate Video Standard for your region:
•Auto: The color systems are automatically identified and the format is set accordingly.
•PAL: This is the standard used in Europe, Australia and many other parts of the world, typically with a 50Hz frame rate.
•SECAM: This is a standard format used mainly in France and Russia.
•NTSC: This is the standard format used mainly in the United States and Japan.
Gamma: Select Gamma from the Advanced menu to choose a DLP
If excess ambient light washes out the image and it becomes difficult or impossible to see details in dark areas, lower the gamma setting to compensate. This improves contrast while maintaining good details for blacks. Conversely, if the image is washed out and unnatural, with excessive detail in black areas, increase the setting.
•CRT sets the gamma to 2.5.
•Film sets the gamma to 2.2.
•Video is similar to Film gamma but differs in dark areas of the image to correspond to the function that video cameras use to create images.
•Bright sets the gamma to 2.0.
•Graphics should only be used for computer presentations that require increased brightness at the cost of grayscale accuracy.
Color Temperature: Color temperature defines the “color of gray;” that is, adjusts the 75% white point to various color points.
To choose a color temperature setting, select Color Temperature from the Advanced menu. Then, press 
or 
to select 5500K, 6500K, 7500K, 9300K or Native. The default setting, 6500K, is appropriate for most situations. Higher settings produce a “bluer” picture; lower ones impart a reddish hue to the image. Select Native to disable white point adjustment of the source signal.
50 | Planar PD7170 Installation/Operation Manual |
