Planar PD7170 operation manual For best results, Planar recommends that you set, Back

Operation

The PD7170 Main Menu, shown in Figure 4-2,provides access to the most Main commonly-used projector functions.

Note	1. For best results, Planar recommends that you set
	DynamicBlack to Off before adjusting Brightness, Contrast
	and other image quality settings in this menu (refer to
	DynamicBlack on page 52). After you have completed the
	initial calibration, set DynamicBlack to On if desired.
	2. Image controls only operate on the active source. To adjust
	the PIP source, switch to the PIP source (thereby making it
	the active source), adjust the controls and then switch
	back.

Figure 4-2. PD7170 Main Menu

Planar PD7170 Installation/Operation Manual 39