Planar PD7170 operation manual Operation, Selecting Video Memory, Selecting an Aspect Ratio

Operation

Operation

Press M1, M2 or M3 to recall settings from a memory preset. Then, press ENTER to confirm your selection. Or, to cancel the operation, press to select Cancel and press ENTER.

You can assign each of these three buttons to any
of four memory presets. For more information, refer		USER MEMORY
to M1 Key / M2 Key / M3 Key on page 59.	M1	M2	M3

SHARP

4.1

Selecting Video Memory

Press the aspect ratio ( ) button to select the appropriate aspect ratio for the type of program material being viewed. For more information, refer to Table 4-2.

4.2

Selecting an Aspect Ratio

When you turn on the PD7170, it switches to the last selected input and looks for a valid signal.

Use these buttons on the remote control to select an input source directly. You can assign each of these five buttons to any input. The default assignments are: 1 = HDMI 1, 2 = HDMI 2,

3 = Component 1, 4 = S-Video, 5 = Video.

SOURCE

1 2 3

45

▲

4.3

Selecting An Input Source

For more information, refer to 1 Key / 2 Key / 3 Key / 4 Key / 5 Key on page 59.

Planar PD7170 Installation/Operation Manual 35