Connecting up
02
12
En
The setup described here is a basic setup that allows you to play discs using just the cables
supplied with the player. In this setup, stereo audio is played through the speakers in your
TV.
• This player is equipped with copy protec-
tion technology. Do not connect this
player to your TV via a VCR using AV
cables, as the picture from this player will
not appear properly on your TV. (This
player may also not be compatible with
some combination TV/VCRs for the same
reason; refer to the manufacturer for
more information.)
• When connecting to your TV as shown
above, do not set the
Component Out
setting (
page 53
) to
Progressive
.
1 Connect the VIDEO OUT and AUDIO
OUT jacks to a set of A/V inputs on your
TV.
Use the supplied audio/video cable,
connecting the red and white plugs to the
audio outputs and the yellow plug to the video
output. Make sure you match up the left and
right audio outputs with their corresponding
inputs for correct stereo sound.
See below if you want to use an S-video,
component or a D video connection.
2 Connect the supplied AC power cable
to the AC IN inlet, then plug into a power
outlet.
S
L
R
PR
PBY
COAXIAL
OPTICAL
COMPONENT VIDEO OUT
VIDEO OUT
DIGITAL
AUDIO OUT
AUDIO OUT
TV
A/V IN
To power outlet
DV566.book 12ページ ２００３年６月１７日 火曜日 午後８時１８分