Pioneer DV-566K-s Audio Settings menu Chapter, Audio DRC, Virtual Surround

Audio Settings menu 07

Chapter 7

Audio Settings menu

Audio DRC

• Default setting: Off

When watching Dolby Digital DVDs at low volume, it’s easy to lose the quieter sounds completely—including some of the dialog. Switching Audio DRC (Dynamic Range Control) to On can help by bringing up the quieter sounds, while controlling loud peaks.

How much of a difference you hear depends on the material you’re listening to. If the mate- rial doesn’t have wide variations in volume, you may not notice much change.

1Press HOME MENU and select ‘Audio Settings’ from the on-screen display.

	HOME MENU
	DVD
Audio Settings	Video Adjust
Play Mode	Disc Navigator
Initial Settings	Setup Navigator

2 Highlight Audio DRC, then use the (cursor left/right) buttons to change

to ‘On’ or ‘Off’, as required.

Audio Settings	1/ 2 page
Audio DRC	Off
Virtual Surround	Off

3Press ENTER to make the setting and exit the Audio Settings screen.

•Audio DRC is only effective with Dolby Digital audio sources.

•Audio DRC is only effective through the digital output when Digital Out (see page 51) is set to On, and Dolby Digital Out (see page 52) is set to Dolby Digital > PCM.

•The effect of Audio DRC depends on your speakers and AV receiver settings.

Virtual Surround

• Default setting: Off

Switch on Virtual Surround to enjoy surround sound effects from just two speakers.

When you play a Dolby Digital or Pro Logic encoded source, TruSurround technology from SRS produces a deep, realistic 3D soundspace from a pair of stereo speakers. SRS TruSurround is a process certified by Dolby Laboratories for Virtual Dolby Digital sound.

47

En