Pioneer DV-566K-s Initial Settings menu Chapter, Using the Initial Settings menu, Digital Out

Initial Settings menu 09

Chapter 9

Initial Settings menu

Using the Initial Settings menu

The Initial Settings menu gives you complete control in setting up your DVD player, including audio, and video output settings, audience limitation settings, among others.

If an option is grayed out it means that it cannot be changed at the current time. This is usually because a disc is playing. Stop the disc, then change the setting.

1Press HOME MENU and select ‘Initial Settings’ from the on-screen display.

	HOME MENU
	DVD
Audio Settings	Video Adjust
Play Mode	Disc Navigator
Initial Settings	Setup Navigator

Digital Audio Out settings

Digital Out

You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs.

• Default setting: On

Initial Settings
Digital Audio Out	Digital Out	On
Video Output	Dolby Digital Out	Off
Language	DTS Out
Display	96kHz PCM Out
Options	MPEG Out

If at any time you need to switch off the digital audio output, set this to Off, otherwise leave it On.

2Select the setup category from the list on the left, then select an item from the menu list to the right.

3Make the setting you want.

•The language options shown in the on- screen display illustrations on the following pages may not correspond to those available in your country or region.

•You can’t switch on/off the optical and coaxial outputs individually.

51

En