Pioneer DV-696AV-K, DV-696AV-S operating instructions ProblemRemedy

Additional information 08

ProblemRemedy

Cannot output 96kHz or • Check that Linear PCM Out is set to Down Sample Off (page 39).

88.2kHz digital audio. • Some discs are digital copy protected and do not output high sampling rate digital audio. In this case the output is automatically downsampled.

No DTS audio output. • If this unit is connected to a non-DTS compatible amplifier or decoder using a digital audio cable, set DTS Out to DTS > PCM (page 39). If you do not do this, noise will be output when you play a DTS disc.

•If this unit is connected to a DTS-compatible amplifier or decoder using a digital audio cable, check the amplifier settings, and that the cable is properly connected.

Audio mix does not • Make sure that Audio Output Mode is set to 2 Channel if you've

sound right or sounds connected to the stereo inputs on your amplifier or TV (page 47). incomplete (for example,

inaudible dialog).

The audio recorded on a • If the audio is switched to [2] when playing a Super VCD that

Super VCD disc is not	contains only one stereo soundtrack, there may be no sound at all.
output properly.	Press AUDIO to change the soundtrack.
Can’t hear effect of	• Virtual Surround does not work with SACD or DVD-Audio.
Virtual Surround.	• The Virtual Surround effect is only output through the AUDIO OUT
	(2ch) analog audio outputs.
	• Make sure that Audio Output Mode is set to 2 Channel (page 47).
	• The effectiveness of Virtual Surround varies with the disc.

English

57

En