Pioneer DV-696AV-K, DV-696AV-S operating instructions Problem Remedy

Additional information 08

Problem	Remedy
New settings made in the	• Some settings can be changed while a disc is playing, but are not
Setup screen menus while	effective until the disc is stopped then restarted: Press , then start
a disc is playing are	playback again ( ).
ineffective.
Settings are canceled.	• When the power is cut due to power failure or by unplugging the
	power cord, settings will be canceled: Press STANDBY/ON on the
	front panel to turn the player off. Wait for --OFF--to disappear from
	the display, then unplug the power cord.
The remote control	• The remote control is too far from the player, or the angle with the
doesn't seem to work.	remote sensor is too wide: Use the remote within its operating range
	(page 19).
	• The batteries are exhausted: Put in new ones (page 6).
No picture/No color.	• Incorrect video connections: Check that connections are correct
	and that plugs are inserted fully. Also check the video cable for
	damage.
	• TV/monitor or AV amplifier settings are incorrect: Check the
	instruction manual of the connected equipment.
	• The video output is set to progressive but your TV/monitor is not
	compatible with progressive scan: See page 14 for how to set to
	interlace.
Screen is stretched or	• The TV Screen setting in the Initial Settings menu is incorrect. See
aspect does not change.	page 52 for how to set it correctly for your TV/monitor.
Picture disturbance	• This player is compatible with Macro-Vision System copy guard.
during playback or the	Some discs include a copy prevention signal, and when this type of
picture is dark.	disc is played back, stripes etc., may appear on some sections of the
	picture depending on the TV. This is not a malfunction.
	• Due to the player’s copy protection circuits, connection of this
	device through a VCR or an AV selector may prevent recording or
	cause picture problems. This is not a malfunction.

English

55

En