02Connecting up

Switching the video output to interlace using the front panel controls

Switch the player to standby then, using the front panel controls, press STANDBY/ON

while pressing

to switch the player back to

Interlace.

 

If the player is connected using HDMI, disconnect the HDMI cable before resetting the player to interlace output. (If left connected, the HDMI output resolution will be reset to its default—see Resetting the output resolution to the default setting with HDMI connection on page 17.)

1Connect the analog AUDIO OUT 5.1ch L/ R and VIDEO OUTPUT jacks on this player to a set of analog audio and video inputs on your AV receiver.

AUDIO/

 

 

AV receiver

VIDEO IN

 

 

 

L

SW

SL PB

VIDEO OUT

 

 

 

R C SR PR Y

HDMI OUT

AUDIO OUT (5.1ch)

COMPONENT VIDEO OUT S-VIDEO OUT

STANDBY/ON

Connecting to an AV receiver

You can connect this player to your AV receiver using the multichannel analog outputs or one of the digital outputs.

In addition to these connections, you should also connect the 2 channel analog outputs for compatibility with all discs.

You’ll probably also want to connect a video output to your AV receiver. You can use any of the video outputs available on this player (the illustration shows a standard (composite) connection).

2Connect the AV receiver’s video output to a video input on your TV.

The diagram shows standard video connec- tions, but you can alternatively use the S-Video or component video connections if they’re avail- able.

You can use the SCART AV connector, or the S- video or component video jacks to connect to the AV receiver if you prefer.

Tip

You usually have to connect the same kind of video cable between your DVD player and AV receiver, and between your AV receiver and TV.

Connecting the multichannel analog outputs

If your AV receiver has 5.1 channel analog inputs, we recommend connecting this player to it using the multichannel analog outputs. Doing this will ensure that you can enjoy all kinds of disc, including Dolby Digital and DTS DVD-Video discs, as well as high sampling rate and multichannel DVD-Audio and SACD discs.

14

En

Page 14
Image 14
Pioneer DV-696AV-S, DV-696AV-K Connecting to an AV receiver, Connecting the multichannel analog outputs, Interlace, Tip