Preparing forYour New Portable Spa

230 Volt Electrical Installation

All 230V spas must be permanently connected (hardwired) to the power supply. These instructions describe the only acceptable electrical wiring procedure. Spas wired in any other way will void your warranty and may result in serious injury.

This is the only acceptable electrical wiring procedure. Spas wired in any other way will void your warranty. See the wiring diagram on page 8.

The electrical wiring of this spa must meet the requirements of any applicable local, state, and federal codes. The electrical circuit must be installed by an electrical contractor and approved by a local building / electrical inspector.

RCD and Wiring Requirements

The power supplied to the spa must be on a dedicated RCD protected circuit with no other appliances or lights sharing the power.

Use copper wire with THHN insulation. Do not use aluminum wire.

Use the table below to determine your GFCI and wiring requirements.

When wires larger than #6 AWG are required, install a junction box near the spa and use #6 AWG wire between the junction box and the spa.

Wire runs over 26 m must increase wire gauge to the next lower number. For example: A normal 50 amp RCD with four #8 AWG copper wires run over 26 m would require you to go to four #6 AWG copper wires.

Testing the RCD Breaker

Test the RCD breaker prior to first use and periodically when the spa is powered. To test the RCD breaker follow these instructions (spa should be operating):

1.Press the TEST button on the RCD. The RCD will trip and the spa will shut off.

2.Reset the RCD breaker by switching the breaker to the full OFF position, wait a moment, then turn the breaker back on. The spa should have power again.

	Spa Model	GFCI Required	Wires Required

All 230V spas except Ultimate		One 32 amp RCD or two 16 amp	Three #10 AWG copper wires
Fitness		RCDs

Spas with the 6205 control		One 32 amp RCD or two 16 amp	Four #10 AWG copper wires
box		RCDs
Fitness 2400 spa with one 5.5		One 32 amp RCD or two 16 amp	Four #10 AWG copper wires
kW heater		RCDs

Fitness 2400 with 8.5 kW		Service 1: One 32 amp RCD or	Service 1: Three #10 AWG copper wires
heater (optional) and Fitness		two 16 amp RCDs	Service 2: Two #10 AWG copper wires
2500 spa		Service 2: One 32 amp RCD or	Service 2: Two #10 AWG copper wires
2500 spa

		two 16 amp RCDs

Fitness 4700 spa		Service 1 (swim side): One 32	Service 1: Three #10 AWG copper wires
		amp RCD or two 16 amp RCDs	Service 2: Two #10 AWG copper wires
		Service 2 (swim side): One 32	Service 2: Two #10 AWG copper wires
		Service 2 (swim side): One 32	Service 3: Three #10 AWG copper wires
		amp RCD or two 16 amp RCDs	Service 3: Three #10 AWG copper wires
		amp RCD or two 16 amp RCDs
		Service 3 (spa side): One 32
		amp RCD or two 16 amp RCDs

2010 Portable Spa

www.calspas.com

LTR20101001, Rev. B

LTR20101001 specifications

Cal Spas LTR20101001, a model that exemplifies luxury and relaxation, offers an impressive combination of features and technologies designed to enhance the spa experience. This portable hot tub is perfect for those looking to enjoy therapeutic benefits in the comfort of their own backyard.

One of the standout features of the Cal Spas LTR20101001 is its spacious seating capacity. Designed to accommodate up to five people, this spa promotes social interaction and creates an inviting atmosphere for family and friends. The ergonomic seating ensures comfort during use, allowing users to fully unwind while enjoying the soothing effects of the water.

The LTR20101001 hot tub is equipped with powerful jets strategically placed throughout the interior. These jets provide targeted hydrotherapy, which is beneficial for muscle relaxation and stress relief. The combination of adjustable jet intensities allows users to customize their spa experience according to their preferences. This versatility is a key characteristic that sets the LTR20101001 apart from other models in the market.

In terms of technology, the spa includes an advanced control system that enables users to easily manage settings such as temperature and jet configurations. The user-friendly interface ensures that even those new to hot tub ownership can operate it with ease. Additionally, the model features energy-efficient insulation and a quiet, reliable heater that maintains optimal water temperature without driving up energy costs.

The Cal Spas LTR20101001 also prioritizes safety and durability. It is constructed with high-quality materials that are resistant to fading and cracking. The spa includes built-in safety features like a locking cover and non-slip surfaces to prevent accidents during entry and exit.

Lastly, the aesthetic appeal of the LTR20101001 cannot be overlooked. With a range of color options and stylish designs, it can easily complement any outdoor setting. The spa's modern look adds a touch of sophistication to backyards, patios, or decks, making it not only a place for relaxation but also an attractive addition to outdoor spaces.

Overall, the Cal Spas LTR20101001 embodies a perfect blend of comfort, technology, safety, and style, making it an exceptional choice for anyone looking to elevate their outdoor leisure experience.

Cal Spas LTR20101001 manual Preparing forYour New Portable Spa, Volt Electrical Installation

Models: LTR20101001