28

Maintenance

4.Remove dirty filter from the spa and rinse off.

5.Place your extra clean filter cartridge back into the spa.

6.Vacuum debris from the bottom of your spa with the “Spa Vacuum”.

Day Two (Friday)

1. Test spa water using Chlorine Test Strips.

2.Based on the Test Strip reading:

•Adjust total alkalinity, then the pH if needed.

•Add 1 tablespoon of Chlorine Granules (if needed).

3.Add 2 oz of Oxidizer Shock to spa. Run Spa for 15 minutes with cover off.

4.Replace cover.

Water Quality

Bromine Generator Clear Water Plan

This plan and its chemical dosages are intended for spas equipped with the optional Cal Clarity Automatic Bromine Generator. The chemical references are designed for Cal Spas chemicals only. Note: Following these instructions is very important to ensure proper operation of your Cal Clarity Automatic Bromine Generator.

Start Up

1.Clean surface of spa with Cal Spas “Multi- Purpose Cleaner”.

2.Apply a protective coat of Cal Spas “Fast Sheen” to the acrylic surface.

3.Fill spa to proper water level with normal tap water. (Do not use soft water.)

4.Use Bromine Test Strip and balance the spa water:

•Adjust total alkalinity (acceptable range is 80-120 ppm)

•Then adjust pH if necessary (between 7.2 to 7.8)

5.Pour in 16 oz. of Cal Spas “Metal Protector” to center of spa.

6.Test for TDS (total dissolved solids, also known as conductivity) .

•The ideal range is 50 to 300 ppm.

•TDS / conductivity must be less than 500 to start with.

7.Phosphate level should be below 200 ppb. Remove phosphates if necessary.

8.Determine the gallons capacity of the spa. Be accurate as this determines the amount of TRU BLU that will be added. Consult the Pre-Delivery Guide for spa gallons.

9.Power up the spa and make sure all the spa’s pumps are set to high speed. Turn the dial on the face of the Cal Clarity Bromine Generator to “OFF”.

10.Sprinkle evenly over the surface of the spa, one 2 lb bottle of TRU BLU sodium bromide per 100 US gallons (370 liters) of water. DO NOT ADD TOO MUCH!

Note: Each bottle of TRU BLU will raise TDS / conductivity amount approximately 500 ppm in a 500 gallon spa.

11.Allow spa to run for 15 minutes so the TRU BLU can dissolve completely before proceeding to the next step.

2010 Portable Spa

www.calspas.com

LTR20101001, Rev. B

Page 27 Page 29
Page 28
Image 28
Cal Spas LTR20101001 manual Maintenance, Water Quality, Bromine Generator Clear Water Plan, Day Two Friday
Page 27 Page 29

LTR20101001 specifications

Cal Spas LTR20101001, a model that exemplifies luxury and relaxation, offers an impressive combination of features and technologies designed to enhance the spa experience. This portable hot tub is perfect for those looking to enjoy therapeutic benefits in the comfort of their own backyard.

One of the standout features of the Cal Spas LTR20101001 is its spacious seating capacity. Designed to accommodate up to five people, this spa promotes social interaction and creates an inviting atmosphere for family and friends. The ergonomic seating ensures comfort during use, allowing users to fully unwind while enjoying the soothing effects of the water.

The LTR20101001 hot tub is equipped with powerful jets strategically placed throughout the interior. These jets provide targeted hydrotherapy, which is beneficial for muscle relaxation and stress relief. The combination of adjustable jet intensities allows users to customize their spa experience according to their preferences. This versatility is a key characteristic that sets the LTR20101001 apart from other models in the market.

In terms of technology, the spa includes an advanced control system that enables users to easily manage settings such as temperature and jet configurations. The user-friendly interface ensures that even those new to hot tub ownership can operate it with ease. Additionally, the model features energy-efficient insulation and a quiet, reliable heater that maintains optimal water temperature without driving up energy costs.

The Cal Spas LTR20101001 also prioritizes safety and durability. It is constructed with high-quality materials that are resistant to fading and cracking. The spa includes built-in safety features like a locking cover and non-slip surfaces to prevent accidents during entry and exit.

Lastly, the aesthetic appeal of the LTR20101001 cannot be overlooked. With a range of color options and stylish designs, it can easily complement any outdoor setting. The spa's modern look adds a touch of sophistication to backyards, patios, or decks, making it not only a place for relaxation but also an attractive addition to outdoor spaces.

Overall, the Cal Spas LTR20101001 embodies a perfect blend of comfort, technology, safety, and style, making it an exceptional choice for anyone looking to elevate their outdoor leisure experience.
Top Page Image Contents