Filling and Powering Up Your Portable Spa

11

Never fill your spa with soft water. Soft water makes it impossible to maintain the proper water chemistry and may cause the water to foam, which will ultimately harm the finish of the spa and void your warranty.

1.Once the spa has been placed on an approved surface and has been correctly wired by a licensed electrician, inspect all plumbing connections in the equipment area of your spa. Ensure that these connections are secure and that they did not loosen during shipment.

2.If equipped, open all gate valves in the equipment area. Before operating the spa, these valves must be in the UP or OPEN position.

3.Remove the filter basket and cartridge from skimmer/filter canister.

4.Place a garden hose in the skimmer/filter canister and fill your spa with regular tap water to the proper water level (halfway up the skimmer area).

5.(For owners of the automatic bromine generator) Make sure the dial on the face of the bromine generator unit is turned to the OFF position.

6.Open the air relief valve (located next to the two filters, if equipped) after the air bubbles stop coming out of it. Close the valve hand-tight.

7.Once the water is at the correct level and air is bled, turn on the power at the RCD breaker.

NOTE: When the power is turned on to the spa, it will perform a diagnostic check for approximately five minutes. When the diagnostic is complete, the spa will automatically operate at filter speed and continue heating until the spa water temperature reaches the default temperature of 37.5˚C.

8.If no water is flowing when the pump is running there could be an air pocket at the suction side of the pump. Shut off power to the spa and loosen the pump union on the suction side of the pump to bleed the air. When air is bled, turn power back on.

9.Re-install the filter and the filter basket into the skimmer/filter canister.

The spa is now ready for use.

NOTE: Never run the spa with the gate valves closed or without water circulating for long periods of time. Be careful not to over-tighten the plumbing fittings.

Preparing forYour New Portable Spa

2010 Portable Spa

LTR20101001, Rev. B

www.calspas.com

Page 10 Page 12
Page 11
Image 11
Cal Spas LTR20101001 manual Filling and Powering Up Your Portable Spa
Page 10 Page 12

LTR20101001 specifications

Cal Spas LTR20101001, a model that exemplifies luxury and relaxation, offers an impressive combination of features and technologies designed to enhance the spa experience. This portable hot tub is perfect for those looking to enjoy therapeutic benefits in the comfort of their own backyard.

One of the standout features of the Cal Spas LTR20101001 is its spacious seating capacity. Designed to accommodate up to five people, this spa promotes social interaction and creates an inviting atmosphere for family and friends. The ergonomic seating ensures comfort during use, allowing users to fully unwind while enjoying the soothing effects of the water.

The LTR20101001 hot tub is equipped with powerful jets strategically placed throughout the interior. These jets provide targeted hydrotherapy, which is beneficial for muscle relaxation and stress relief. The combination of adjustable jet intensities allows users to customize their spa experience according to their preferences. This versatility is a key characteristic that sets the LTR20101001 apart from other models in the market.

In terms of technology, the spa includes an advanced control system that enables users to easily manage settings such as temperature and jet configurations. The user-friendly interface ensures that even those new to hot tub ownership can operate it with ease. Additionally, the model features energy-efficient insulation and a quiet, reliable heater that maintains optimal water temperature without driving up energy costs.

The Cal Spas LTR20101001 also prioritizes safety and durability. It is constructed with high-quality materials that are resistant to fading and cracking. The spa includes built-in safety features like a locking cover and non-slip surfaces to prevent accidents during entry and exit.

Lastly, the aesthetic appeal of the LTR20101001 cannot be overlooked. With a range of color options and stylish designs, it can easily complement any outdoor setting. The spa's modern look adds a touch of sophistication to backyards, patios, or decks, making it not only a place for relaxation but also an attractive addition to outdoor spaces.

Overall, the Cal Spas LTR20101001 embodies a perfect blend of comfort, technology, safety, and style, making it an exceptional choice for anyone looking to elevate their outdoor leisure experience.
Top Page Image Contents