26

Traditional Chemical Start Up Bromine Clear Water Plan

Water Quality Maintenance

Prior to filling a spa for the first time, or after a routine draining, you will want to follow this start-up plan to extend water life and performance. If you are following either the Bromine or Chlorine “Clear Water Plans”, you will notice that both start-up processes are the same with the exception of Step 6. As with all chemical dosages listed in these “Clear Water Plans”, start-up dosages are intended for 500-gallon spas. Please adjust the chemical dosages to the capacity of your particular spa.

Start Up

1.Clean surface of spa with Cal Spas “Multi-Purpose Cleaner”.

2.Apply a protective coat of Cal Spas “Fast Sheen” to the acrylic surface.

3.Fill spa to proper water level with normal tap water (Do not use soft water)

4.Use test strip and balance the spa water:

Adjust total alkalinity (acceptable range is 80- 120ppm),

Then adjust pH if necessary (between 7.2 to 7.8).

5.Pour in 16 oz of Cal Spas “Metal Protector” to center of spa.

6.Add either Bromine or Chlorine (According to your preferred plan)

Bromine: Add 2 oz of Cal Spas “Go Brom” to

establish a bromine base.

Add 2 Cal Spas “Bromine Tablets” to Bromine Floater.

Set floater opening at #2.

Chlorine: Add two tablespoons of Cal Spas “Chlorine Granules” to the spa water.

7.Sprinkle 2 oz of Cal Spas “Oxidizer Shock” in the center of the spa and turn on jets for 15 minutes. Leave spa uncovered during this time.

8.Put cover on spa and allow to heat up to desired temperature.

This plan and its chemical dosages are intended for Cal Spas chemicals only. Most chemical manufacturers use different chemical formulas and strengths. Only Cal spas chemicals are specially formulated to provide chemical balance at lower dosages. Always read and follow printed instructions on chemical bottles and packages.

Day One (Monday)

1.Test spa water using “Bromine Test Strips”.

2.Based on the Test Strip readings:

Adjust total alkalinity first (acceptable range of 80-120 ppm)

Then adjust the pH if needed (range is between 7.2 to 7.8).

Add bromine tablets if needed. (Do not add more than 2)

The recommended level of bromine is 3-5 ppm.

3.Add 2 oz of “Stain and Scale Defense”.

4.Remove dirty filter from the spa and rinse off.

Allow to dry.

5.Place your extra clean filter cartridge back into the spa.

6.Vacuum debris from the bottom of your spa with the “Spa Vacuum”.

Day Two (Wednesday)

1.Test spa water using Bromine Test Strips.

2.Based on the Test Strip reading: Adjust total alkalinity, then the pH if needed.

Day Three (Friday)

1.Test spa water using Bromine Test Strips.

2.Based on the Test Strip reading:

Adjust total alkalinity, then the pH if needed.

Add one Bromine Tablet (if needed).

3.Add 2 oz of Oxidizer Shock to spa. Run Spa for 15 minutes with cover off.

4.Replace cover.

2010 Portable Spa

www.calspas.com

LTR20101001, Rev. B

Page 26
Image 26
Cal Spas LTR20101001 manual Traditional Chemical Start Up Bromine Clear Water Plan, Day One Monday, Day Two Wednesday

LTR20101001 specifications

Cal Spas LTR20101001, a model that exemplifies luxury and relaxation, offers an impressive combination of features and technologies designed to enhance the spa experience. This portable hot tub is perfect for those looking to enjoy therapeutic benefits in the comfort of their own backyard.

One of the standout features of the Cal Spas LTR20101001 is its spacious seating capacity. Designed to accommodate up to five people, this spa promotes social interaction and creates an inviting atmosphere for family and friends. The ergonomic seating ensures comfort during use, allowing users to fully unwind while enjoying the soothing effects of the water.

The LTR20101001 hot tub is equipped with powerful jets strategically placed throughout the interior. These jets provide targeted hydrotherapy, which is beneficial for muscle relaxation and stress relief. The combination of adjustable jet intensities allows users to customize their spa experience according to their preferences. This versatility is a key characteristic that sets the LTR20101001 apart from other models in the market.

In terms of technology, the spa includes an advanced control system that enables users to easily manage settings such as temperature and jet configurations. The user-friendly interface ensures that even those new to hot tub ownership can operate it with ease. Additionally, the model features energy-efficient insulation and a quiet, reliable heater that maintains optimal water temperature without driving up energy costs.

The Cal Spas LTR20101001 also prioritizes safety and durability. It is constructed with high-quality materials that are resistant to fading and cracking. The spa includes built-in safety features like a locking cover and non-slip surfaces to prevent accidents during entry and exit.

Lastly, the aesthetic appeal of the LTR20101001 cannot be overlooked. With a range of color options and stylish designs, it can easily complement any outdoor setting. The spa's modern look adds a touch of sophistication to backyards, patios, or decks, making it not only a place for relaxation but also an attractive addition to outdoor spaces.

Overall, the Cal Spas LTR20101001 embodies a perfect blend of comfort, technology, safety, and style, making it an exceptional choice for anyone looking to elevate their outdoor leisure experience.