Light
Press the Light button to turn on the light. Press it once again to turn the light off. All optional lighting such as the control panel light and cabinet perimeter lighting is controlled by the Light button and will turn on and off with the spa light.
Option
Press the Option button to turn on the pump 2 on. Press it once again to turn off the pump 2 off.
Automatic Time outs
These features will automatically turn themselves off during periods of continuous use:
• | Low speed pump | After 4 hours |
• | High speed pumps | After 15 minutes |
• | Optional circulation pump | After 15 minutes |
• | Optional turbo | After 15 minutes |
• | Spa light | After 15 minutes |
2010 Portable Spa
Setting Filtration Cycles
Your spa is programmed to filter twice a day. The first cycle will begin 6 minutes after the spa is turned on and the second cycle 12 hours later. The factory has programmed the cycle to last for 2 hours but this can be switched to 4, 6, or 8 hours depending on your requirements. To set filtration time, turn off the power to the spa at the time of day you would like one of the filtration cycles to begin then turn back on after 30 seconds. When power has been restored, press the “Temp” button then the “Jets” button. Press “Temp” button again to change the filtering cycle duration. When desired duration is selected press the “Jets” button to exit.
At the beginning of each filtering cycle the Turbo system will run for approximately 30 seconds. The low speed pump will run for the duration of the filtering cycle and if an Ozone system is installed it will be activated. During filtering, “FC” will appear on the main display.
13 OperatingYour
Spa
LTR20101001, Rev. B | www.calspas.com |
