32 Maintenanceand Cleaning

1.Open all filter covers.

2.Remove the filter baskets and filters.

3.Drain your spa completely as described in the instructions above.

4.Remove drain plugs from the front of the pumps.

5.Disconnect the unions from both sides of the pump.

6.Use a wet/dry vacuum to blow any remaining water out of the jets and equipment area.

Cover your spa with a good spa cover and an all- weather tarp to ensure that neither rain nor snow enters the spa.

Cleaning the Cover, Shell and Pillows

Due to the constant punishment your spa cover and pillows receive, you should protect them by applying Vinyl and Leather Cleaner as part of your monthly maintenance plan. Cal Spas™ Vinyl and Leather Cleaner is specifically designed to protect spa covers and pillows from chemical and ultraviolet light damage. It accomplishes this without leaving an oily residue behind that is normally associated with common automotive vinyl protectants.

Use of Vinyl and Leather Cleaner

Cal Spas™ Vinyl and Leather Cleaner should be used sparingly. Incorrect usage may cause water clarity issues.

Spa Covers

1.Remove spa cover from spa.

2.Allow spa cover to dry completely.

3.Spray Vinyl and Leather

 

Cleaner to cover evenly

and

 

wipe dry.

 

4.

Allow spa cover to dry

 

 

completely.

 

5.

Reinstall cover on spa.

 

Pillows

1.Wipe pillows dry with a soft cloth.

2.Carefully spray Vinyl and Leather Cleaner directly onto pillow.

3.Wipe pillows dry.

4.Allow pillows to dry completely.

Warning: Do not use automotive vinyl protectants on spa covers or pillows. These products are generally oil-based and will cause severe water clarity issues that are difficult to correct.

All-Purpose Cleaner (Spa finish cleaning)

Cal Spas™ All-Purpose Cleaner is an essential part of maintaining your spa’s finish. Through normal use, the spa’s finish can accumulate dirt, oil, and calcium causing a rough feel and unsightly scum lines. Cal Spas™

All-Purpose Cleaner is a low detergent, non-abrasive cleaner specifically formulated to clean the spa without damaging its acrylic finish.

The most effective solution to minimize cleaning time is prevention. When the following steps are followed, the spa’s finish will actually start to resist most of the elements that cause calcium build-up and make scum line clean up easier.

Prior to Spa Start-Up and Refilling

1.Spray Cal Spas™ Multi-Purpose Cleaner directly on to the spa’s finish.

2.Wipe clean with a clean soft cloth.

3.Repeat on heavily calcified areas.

4.Wipe spa thoroughly with a wet sponge, rinsing often with a bucket of clean water.

5.Allow spa to dry completely.

6.Apply a coat of Cal Spas™ Fast Sheen to the spa’s entire finish with a soft towel or sponge.

7.Allow Fast Sheen to dry until white and powdery.

8.Buff clean with a soft cloth, rotating frequently.

Periodic Maintenance

1.Spray Cal Spas™ Multi-Purpose Cleaner directly to the spa’s finish.

2.Wipe clean with a clean soft cloth.

3.Wipe spa thoroughly with a wet sponge, rinsing often in a bucket of clean water.

Cal Spas™ Multi-Purpose Cleaner should not be sprayed directly into the spa water. Incorrect usage of this product will cause water clarity issues.

2010 Portable Spa

www.calspas.com

LTR20101001, Rev. B

Page 31 Page 33
Page 32
Image 32
Cal Spas LTR20101001 manual Cleaning the Cover, Shell and Pillows, Use of Vinyl and Leather Cleaner, Periodic Maintenance
Page 31 Page 33

LTR20101001 specifications

Cal Spas LTR20101001, a model that exemplifies luxury and relaxation, offers an impressive combination of features and technologies designed to enhance the spa experience. This portable hot tub is perfect for those looking to enjoy therapeutic benefits in the comfort of their own backyard.

One of the standout features of the Cal Spas LTR20101001 is its spacious seating capacity. Designed to accommodate up to five people, this spa promotes social interaction and creates an inviting atmosphere for family and friends. The ergonomic seating ensures comfort during use, allowing users to fully unwind while enjoying the soothing effects of the water.

The LTR20101001 hot tub is equipped with powerful jets strategically placed throughout the interior. These jets provide targeted hydrotherapy, which is beneficial for muscle relaxation and stress relief. The combination of adjustable jet intensities allows users to customize their spa experience according to their preferences. This versatility is a key characteristic that sets the LTR20101001 apart from other models in the market.

In terms of technology, the spa includes an advanced control system that enables users to easily manage settings such as temperature and jet configurations. The user-friendly interface ensures that even those new to hot tub ownership can operate it with ease. Additionally, the model features energy-efficient insulation and a quiet, reliable heater that maintains optimal water temperature without driving up energy costs.

The Cal Spas LTR20101001 also prioritizes safety and durability. It is constructed with high-quality materials that are resistant to fading and cracking. The spa includes built-in safety features like a locking cover and non-slip surfaces to prevent accidents during entry and exit.

Lastly, the aesthetic appeal of the LTR20101001 cannot be overlooked. With a range of color options and stylish designs, it can easily complement any outdoor setting. The spa's modern look adds a touch of sophistication to backyards, patios, or decks, making it not only a place for relaxation but also an attractive addition to outdoor spaces.

Overall, the Cal Spas LTR20101001 embodies a perfect blend of comfort, technology, safety, and style, making it an exceptional choice for anyone looking to elevate their outdoor leisure experience.
Top Page Image Contents