SAFETY INSTRUCTIONS
Disc-related
7Recommended Discs
÷For stable recording and playback, always use a recommended brand of disc.
÷For specific disc recommendations, consult your dealer or the Pioneer website.
÷Avoid touching or scratching the signal surface (shiny side) of the disc
÷Hold the disc by the edges or by the center hold and one edge
Discs for Recording
7When data cannot be recorded or errors occur during recording:
÷Are you using a recommended brand of disc?
÷Has a sufficiently large writing area been secured?
÷Are you using a disc that has already been finalized (closed to further recording)?
÷Has the disc been inserted correctly with its label side facing up and writing side down?
÷Is the disc dirty or scratched?
÷Do not affix paper or labels to the disc
÷Discard warped or cracked discs as
they may cause damage to the drive
÷Avoid specially
shaped discs such as hearts or polygons
÷Remove dust or
lint from the disc with a soft cloth by wiping from
the inside to the
outside edge rather than in a circular motion
÷Do not use
7The device cannot read a disc that has been recorded.
÷Are you using a recommended brand of disc?
÷Is an unwritten disc installed?
÷Is the disc dirty or scratched?
÷It is possible that condensation has formed on the optical components or on the disc. (Wait 1 to 2 hours before attempting to use the device again.)
*For other issues, consult the operating instructions accompanying your application software.
INSTALLATION-RELATED PRECAUTION
Be sure to remember the following points during the installation of your
÷A maximum of four
÷The
÷This drive may be installed in drive vays 1 to 8.
6
En