Pioneer DVJ-1000 manual Other Troubleshooting, Symptom, Probable Diagnosis, Remedy

Other (Troubleshooting)

Symptom	Probable Diagnosis	Remedy
Jog dial doesn’t respond.	¶ NORMAL/DJ switch is set to “NORMAL”.	¶ Set NORMAL/DJ switch to “DJ”.
Jog dial performs different operation	¶ Jog mode is incorrect.	¶ Press the JOG MODE button to select desired
from that intended.		jog mode (VINYL ON/OFF).
	¶ Hyper-jog mode is incorrect.	¶ Press the HYPERJOG MODE button to select
		desired mode.
	¶ With DVD, some discs do not support point DJ	¶ Play a part supporting DJ operations.
	operations during playback.
DJ operations don’t respond.	¶ NORMAL/DJ switch is set to “NORMAL”.	¶ Set NORMAL/DJ switch to “DJ”.
	¶ With DVD, some discs or players do not support	¶ Play a part supporting DJ operations.
	point DJ operations during playback.
	¶ “DISABLE DJ MODE” is displayed.	¶ DJ operations are not supported here. Play a
	¶ With DVD, DJ operations not be possible when	part of the disc supporting DJ operations.
	playback is performed from the Setup Menu.
With power ON, disc stops.	¶ If left in pause mode without command input for	¶ Press PLAY/PAUSE (6) button to resume
	100 minutes or more, player automatically stops	playback. Or press EJECT (0) button to
	disc rotation.	remove disc.
	¶ Disc rotation stops with disc playback completes
	last track.
Screen images stops and com-	¶ Operations prohibited on some discs.	¶ Press the STOP button, then begin playback
mands don’t respond.		again.
Setting items don’t appear on Setup	¶ Setup Menu is set for [Basic] mode.	¶ Set Setup Menu to [Expert] mode.
Menu.
Digital sound isn’t reproduced.	¶ [Digital Out] option is set to [Off].	¶ Set [Digital Out] option to [On].
96 kHz audio is not output in digital.	¶ [96kHz PCM Out] option is set to [96kHz 3 48kHz].	¶ Set [96kHz PCM Out] option to [96kHz].
	¶ Some discs prohibit 96 kHz output.
DTS audio is not reproduced.	¶ Amplifier or decoder does not support DTS audio.	¶ Press audio button to select audio format
		other than DTS.
Image appears stretched horizon-	¶ [TV Screen] option settings are incorrect.	¶ Set [TV Screen] options properly.
tally or vertically.	¶ S-terminal video output connection is incorrect.	¶ Due to television signal processing, images
		may appear lengthened horizontally or
		vertically. In this case, set [S-Video Out]
		option to [S1].
During DVD playback, image is	¶ Disc is equipped with analog copy protect	¶ Not a malfunction.
distorted or dark.	technology.
Subtitles don’t appear.	¶ NORMAL/DJ switch is set to “DJ”. (Subtitles	¶ Set NORMAL/DJ switch to “NORMAL”.
	aren’t displayed in DJ mode)
Can’t open Setup Menu.	¶ Setup cannot be performed during playback in DJ	¶ Stop playback before performing settings.
	mode.	¶ Perform settings in NORMAL mode.
When angle is changed, playback is	¶ In DJ mode, a special playback mode is used so	¶ Not a malfunction.
momentarily interrupted.	changing the angle causes temporary playback
	interruption.
When audio format is changed,	¶ In DJ mode, a special playback mode is used so	¶ Not a malfunction.
playback is momentarily interrupted.	changing the audio causes temporary playback
	interruption.
Title or chapter search command	¶ With DVD, some discs do not support certain	¶ Not a malfunction.
doesn’t respond.	operations.
Can’t begin playback from title or	¶ With DVD, some discs require playback from a	¶ Not a malfunction.
chapter designated before loading	specified place.
disc.
Cue point navigation menu doesn’t	¶ Disc is copy protected.	¶ If the disc includes a copy-protect signal,
display thumbnail images.		thumbnail images cannot be recorded to the
		memory card.
	¶ No memory card is loaded.	¶ Insert memory card formatted in compliance
		with SD memory card standards.
	¶ Disc loaded is CD.	¶ Thumbnail images are not displayed with CDs.
Cue point memory cannot be	¶ During DVD/MP3 play, the inserted memory card	¶ DVD/MP3 data cannot be recorded to
recorded.	was recorded on a CDJ-1000, CDJ-1000MK2.	multimedia cards (MMC) recorded on a CDJ-
		1000 or CDJ-1000MK2.
	¶ No memory card is loaded.	¶ Insert memory card formatted in compliance
		with SD memory card standards.
	¶ SD memory card has been set for write-protect.	¶ Set write-protect switch to allow writing to card.
Can’t use SD memory cards.	¶ SD memory card not loaded.	¶ Insert SD memory card.
	¶ SD memory card has been set for write-protect.	¶ Set write-protect switch to allow writing to card.
	¶ SD memory card not formatted properly.	¶ Insert memory card formatted in compliance
		with SD memory card standards.

52