Pioneer DVR-330-S, DVR-310, DVR-7000 manual This enables you to watch discs

02Connecting up

Connecting to a cable box or satellite receiver (2)

If many or all the channels you receive by cable or satellite are scrambled, we recommend using this setup.1 Using the setup on this page you can:

•Record any channel by selecting it on the cable box/satellite receiver.

•Record using the Auto Start Recording feature (see Automatic recording from a satellite tuner on page 42).

Important

•Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box. Always connect each component directly to your TV or AV amp/receiver.

	ANTENNA
AUDIO/VIDEO	IN
INPUT
2	TV

AC IN

CONTROL

IN OPTICAL

DIGITAL OUT

INPUT 1/AUTO START REC

R L

AUDIO	VIDEO	S-VIDEO
	INPUT 3

1 ANTENNA OUT

		OUTPUT 1
R	L	Y	PB
			IN	ANTENNA	OUT
		COMPONENT
		VIDEO OUT

AUDIO	VIDEO	S-VIDEO	PR
	OUTPUT 2

3

AUDIO/VIDEO

OUTPUT

ANTENNA

IN (RF IN)

1

ANTENNA

OUT

Cable box/

Satellite receiver

ANTENNA

IN

1

Antenna/cable TV wall outlet

1 Connect RF antenna cables as shown.

This enables you to watch and record TV channels.

2Connect the AUDIO and VIDEO OUTPUT jacks (1 or 2) on this recorder to a set of audio/video inputs on your TV using a set of A/V cables (as supplied).

This enables you to watch discs.

3Connect the audio/video output of your cable box/satellite receiver to the INPUT jacks on this recorder using a set of A/V cables.

This enables you to record scrambled TV channels.

Note

1.• The setup on this page does not allow you to watch one channel and record another.

•The diagram shows standard video connections, but you can alternatively use the S-video or component video connections if they’re avail- able.

16

En