Pioneer DVR-330-S, DVR-310 Setting a manual timer recording, Code programming with the power off

Recording 05

• You can also use the	buttons to select
digits from the on-screen display.

2After making the settings, select ‘Enter’ and press ENTER.

The timer recording screen appears with the timer program you just set.

3Confirm that the settings are correct.

If the channel number isn't displayed, use the

buttons to highlight CH, then use the buttons to set the correct channel number.

•If the channel number is set, but incorrectly, set up the guide channel (see G-Code CH Setting on page 69).

4Select ‘Store Program’ to finish.

•Other options in the same menu panel allow you to name the program, and change the recording destination and/or recording mode.

3 Press ENTER.

The display shows the timer settings:

Date Start time End time Recording channel Recording mode.

•If CODE ERROR appears in the display, check that the number is correct and that the guide channel is set (see G-Code CH Setting on page 69), then set the timer recording again.

•If CAN’T SET appears in the display, it means that although you entered a valid number, the program has already finished.

Setting a manual timer recording

The timer recording screen you can see all the timer programs already set, clear programs and set up new ones.

CLEAR

CLEAR

G-Code programming with the power off

You can enter a G-Code programming number when the recorder is in standby.

HDDDVD

CH

G-CODE +	CLEAR
	CLEAR

ENTER

Important

•You can’t use this feature until you have set up the guide channels. See G-Code CH Setting on page 69.

•You can’t change the recording mode.

•You can’t program daily or weekly timer recordings.

1 Press ’G-Code’.

The front panel display shows the current recording mode and prompts you to enter the G-Code programming number.

2Use the number buttons to enter the number.

•To clear the last digit entered, press CLEAR.

ENTER

HOME

MENU

PREV NEXT

TIMER REC

1Press TIMER REC to display the Timer Recording screen.

You can also access the Timer Recording screen from the Home Menu (press HOME MENU, select Timer Recording, then Timer Recording).

This screen shows all the timer programs currently set.

	Timer Program View
SAT	26/03	15:00			Tmr Pgms	2/32
			Manhattan Open Tennis		OK
			SAT	26/03 18:00 – 19:00	Pr 3
			World Journey		OK
			SUN	27/03 19:30 – 21:00	Pr 4
				New Input
			DVD Remain		0h30m(SP)

•Each row is for one timer recording program, with the date and time information, channel, recording mode, and recording status.

37

En