Pioneer DVR-310, DVR-330-S, DVR-7000 manual Timer recording using the G-Code programming system

05Recording

3 Useto move the cursor to the recording start date and time on the grid.

• You can move the cursor forward or back an hour at

a time using the and buttons.

Current time

Recording start time

Easy Timer Recording
8:00	9:00	10:00	11:00	12:00	13:00	14:00
1/01
2/01
3/01
SAT	1/01	11:45		–	––:––
CHANNEL +/–	Pr 7	REC MODE		SP

Each row of the grid is one day (you can set the timer recording for up to a month in advance). Each column is a 15 minute interval.

The darker area represents time that has already passed and can’t therefore be selected. The lighter area is time that’s available.

4 Press ENTER to set the start time.

The start date and time is displayed in the middle of the screen.

•You can go back and reset the start time if you need to by pressing RETURN.

5 Use the to move the cursor to the recording end time on the grid.

Recording start time

Recording end time

Easy Timer Recording
11:00	12:00	13:00	14:00		15:00	16:00	17:00
1/01
2/01
3/01
SAT	1/01		11:45		–	13:45
CHANNEL +/–	Pr 7	REC MODE		SP

As you move the cursor around the grid, an arrow stretches from the start time to the current cursor position, representing the length of the recording. A recording of up to six hours can be set.

6Press ENTER to set the end time.

7Select ‘Yes’ to set the timer recording and exit, or ‘No’ to go back to the timer recording screen.

•You can check the timer recording details you just set from the main timer recording screen (see Setting a manual timer recording on page 37).

36

Timer recording using the G-Code™ programming system

This system makes programming timer recordings very simple. Most TV guides publish G-Code programming numbers with their program details. If you want to make a timer recording of a program, you just input the corresponding code. The date, start, stop and channel settings are made automatically. All you have to do is tell the recorder the recording mode, and whether it’s a once-only recording or a regular recording.

Note that if the country setting is incorrect (set in the Setup Navigator), timer recordings made using the G- Code programming system may not work as expected.

CH

G-CODE +	CLEAR
	CLEAR

ENTER

HOME

MENU

REC MODE

1Press ‘G-Code’ to display the G-Code program screen.

You can also access this screen from the Home Menu (press HOME MENU, select Timer Recording, then G-Code).

G-Code#

1 2 3

4 5 6

7 8 9 Cancel

0 Clear Enter

•Use the number buttons to enter the G-Code programming number. (To clear the last digit entered, press CLEAR.)

En