Connecting up
02

16

En

Using other types of video output

This recorder has standard (composite), S-video and component video outputs. The main difference between them is
the quality of the picture. S-video delivers a better picture than composite video, while component video gives better
picture quality still. The variety of outputs also gives you the flexibility of connecting your particular equipment using
the best connection type available.

1 Connecting using an S-video output

S-video carries the picture as separate color and
luminance (brightness) signals.
There are two S-video outputs for connection to TVs,
monitors, VCRs or other equipment.

•Use an S-video cable (not supplied) to connect an
S-VIDEO OUTPUT (1 or 2) to an S-video input on your
TV, monitor (or other equipment).

2 Connecting using the component video output

Component video carries the picture as two separate
color signals, plus a luminance (brightness) signal.
See also

Component Video Out

on page 96 for how to set
up the component video output for use with a progressive
scan-compatible TV.

• Use a component video cable (not supplied) to
connect the COMPONENT VIDEO OUT jacks to a
component video input on your TV, monitor (or
other equipment).
TV
COMPONENT VIDEO OUT DIGITAL OUT
AC IN
OPTICAL
CONTROL
IN
YP
B
P
R
INOUT
VHF
/
UHF
INPUT 1/
AUTO START
REC
RL
AUDIO VIDEO S-VIDEO
RL
AUDIO VIDEO S-VIDEO
OUTPUT 2
OUTPUT 1
INPUT 3
S-VIDEO
INPUT
COMPONENT
INPUT
12
DVR-04_HDD_KU.book 16ページ ２００４年４月１５日　木曜日　午前１０時４８分