Pioneer DVR-420H manual Copying and back-up, One Touch Copy* HDD to DVD

Copying and back-up 07

Real-time copying

Real-time copying is also possible, with the advantage that you can manually set a different recording mode from the original. For example, you can record a title originally recorded in FINE mode in SP mode.

When real-time copying from the HDD to a Video mode DVD, the chapter markers in the original material are not copied. Chapter markers are put into the copy at intervals, according to the Auto Chapter (Video) setting (see also Auto Chapter (Video) on page 102).

Frame accuracy and copying

The Frame Accurate setting (see Frame Accurate on page 102) does not affect the actual video content on the HDD, but it does affect what can be copied and whether high-speed copying can be used.

When Frame Accurate is set to Off, high-speed copying can generally be used to copy titles in the Copy List using a DVD-R or DVD-RW disc in VR or Video mode. However, copy-once protected material (see Restrictions on copying below) can’t be added to the Copy List, and the divide points in edited titles may be out by as much as 0.5 seconds when compared to the original.

When Frame Accurate is On, you can add copy-once protected titles to the Copy List and divide points in edited titles are maintained accurately. However, depending on the content of the Copy List and the disc, it may not be possible to use high-speed copying.

Restrictions on copying

Some video material is copy-once protected. This means that it can be recorded to HDD, but it can’t then be freely copied again. If you want to transfer copy-once protected material from HDD to DVD, you’ll need to use a VR mode DVD-RW disc compatible with CPRM Ver. 1.1 or higher (see CPRM on page 45 for more on this). Only one instance of a copy-once protected title can be added to the Copy List, and after it’s been copied, the title is erased from the HDD (it is therefore not possible to copy a locked title that is copy-once protected).

You can identify copy-once protected material during playback by displaying disc information on-screen. If the current title is copy-once protected, an exclamation mark ( ! ) is shown (see Play display 2 on page 34).

Copyright

You may use this product only to reproduce or copy materials for which you own the copyright or have obtained permission to copy from the copyright owner or for which you otherwise have a legal right to reproduce or copy. Unless you own the copyright or have obtained

permission from the copyright owner or otherwise have a legal right to reproduce or copy, you may be violating the law, including copyright law, and may be subject to payment of damages and other remedies.

One Touch Copy* (HDD to DVD)

The One Touch Copy feature copies the currently playing title (or currently selected title in the Disc Navigator) from the HDD to DVD. The whole title is copied, regardless of where in the title you start copying. The recorder copies at the maximum speed possible.

For One Touch Copy to work, make sure that a recordable DVD-R/RW disc is loaded.

* See also Copyright above.

ONE TOUCH

COPY

HDD DVD

•During HDD playback, press ONE TOUCH COPY to copy the current title to DVD.

The front panel display indicates that the title is being copied. Playback continues while copying.

Note

•Title name, chapter markers, as well as thumbnail picture markers (Navimark) for the Disc Navigator, are also copied. However, if you copy to a Video mode DVD-R/RW, only the first 32 characters of a name are copied.

•The chapter markers in the copy may not be in exactly the same positions as the original when recording on to a Video mode disc.

•You can’t use the One Touch Copy function to copy a title if any part of the title is copy-once protected.

•A title that contains mixed aspect ratios can’t be copied to a Video mode disc. Use a VR mode DVD- RW disc for this type of material.

•Low resolution (EP or LP, or MN1–18) widescreen material can’t be copied to a Video mode disc. Use a VR mode DVD-RW disc for this type of material.

59

En