Initial Setup menu Chapter, Clock Setting

13The Initial Setup menu

The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on.

DVR-520H screen

•Some settings can only be changed when the recorder is stopped. During playback these settings are grayed out in the Initial Setup menu.

•Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of inactivity.

Set ‘Clock Set CH‘ to the channel preset number that broadcasts a clock signal, then move the cursor down to ‘Start’ and press ENTER.

If the time could not be set automatically, press RETURN to go back to the previous screen and select Manual.

•Manual clock setting

If no stations in your area are broadcasting time signals, you can set the clock manually:

• Use the	(cursor left/right) buttons to set your
time zone, then press ENTER.
• Press	(cursor down) then use the	(cursor

left/right) buttons to set daylight saving time (D.S.T.) On or Off, then press ENTER.

The date (month, day, year) and time must be set before you can use any of the timer recording features.

The clock can be set automatically if there is a broadcast station transmitting clock signals, or manually.

Select Auto to set the clock automatically or Manual to display the clock setting screen.

Some TV channels broadcast time signals together with the program. This recorder can use these signals to set the clock automatically.

Recording

Playback

Use the	(cursor up/down) buttons to change
the value in the highlighted field.
Use the	(cursor left/right) buttons to move

from one field to another.