Pioneer DVR-420H manual Playback Switching audio channels, Switching camera angles

Playback

Switching audio channels

VR mode CD Video CD WMA/MP3

For VR mode content that has both a main and a SAP (Secondary Audio Program) audio channel, you can switch between main (L), SAP (R), or both (L+R).

When playing Video CDs and audio CDs you can switch between stereo, just the left channel or just the right channel.

05

Switching camera angles

DVD-Video

Some DVD-Video discs feature scenes shot from two or more angles—check the disc box for details: it should be

marked with a icon if it contains multi-angle scenes. When a multi-angle scene is playing, the same icon appears on screen to let you know that other angles are available (this can be switched off if you prefer—see Angle Indicator on page 105).

AUDIO

ANGLE

1To display/switch the audio channel, press AUDIO repeatedly.

The audio channel(s) currently playing are indicated on- screen.

VR mode

•L+R – Both channels (default)

•L – Left/main channel only

•R – Right/SAP channel only

CD Video CD WMA/MP3

•Stereo – Stereo (default)

•1/L – Left channel only

•2/R – Right channel only

Note

•When playing a Dual Mono recording on a VR mode disc, if you are listening to the Dolby Digital soundtrack via the digital output, you cannot switch

the audio channel. Set Dolby Digital Out to Dolby Digital PCM (see Dolby Digital Out on page 98) or listen via the analog outputs if you need to switch the audio channel.

•To switch the camera angle, press ANGLE.

•The angle number is displayed on-screen.

•If the disc was paused, playback starts again with the new angle.

•Repeat play is canceled if you change the angle while repeat playback is active.

Note

•You can also change the angle from some DVD-Video disc menus. Press TOP MENU to access.

43

En