OPERATIONS (Digital Jog Break)
1)JET, WAH, PHASE SHIFTER, RING, ZIP, HUMANIZER, VOCODER
(Jog effect select) | 2) DIGITAL JOG BREAK |
DEPTH 
HOLD
CHARACTER
LOOP
SINGLE
MIX
Jog memory (M)
Jog dial
Digital Jog Break
Since the digital jog break can continuously change the parameters of each effect generated by rotating the Jog dial, the effects can be controlled like a musical instrument. Further, by using the jog memory function, the continuously changing effect sound can be stored in memory, and later played back by pressing one of the JOG MEMORY PLAY buttons (SINGLE or LOOP).
1.Use the Jog effect select buttons to select the desired effect.
¶Select from JET, WAH, PHASE SHITER, RING, ZIP, HUMANIZER, or VOCODER.
¶The selected Jog effect button flashes.
¶See page 12 regarding each effect.
2.Set the DIGITAL JOG BREAK lever switch to ON and turn the Jog dial.
[DIGITAL JOG BREAK Lever switch operation]
When pushed away from you to the [ON/LOCK] position:
The switch is locked on, so that the effect continues to be applied even if you remove your hand from the lever. To stop the effect, return the lever to the middle position [OFF].
When pulled toward you to the [ON] position:
The effect is applied only while the lever is pulled to the [ON] position; when the lever is released, it returns automatically to the middle [OFF] position. Use this function when you wish to alternate rapidly between ON and OFF.
¶Parameter changes caused by rotating the Jog dial are indicated on the DIGITAL JOG BREAK METER.
DEPTH dial
Set to the center center indent position for standard effect sounds. For more information regarding the change in parameter 1 in response to DEPTH dial rotation, see pages 12, 13.
CHARACTER dial
Set to the center center indent position for standard effect sounds. For more information regarding the change in parameter 2 in response to CHARACTER dial rotation, see pages 12, 13.
20
MIX dial
Use to adjust the mixing balance of original and effect sounds. Set to the center indent position for standard effect sounds.
HOLD Function
When the HOLD button is pressed and lit, the effect generated by the rotation of the Jog dial continues when the dial rotation stops.
Jog Memory
Up to 8 seconds of the digital jog break’s jog dial movement can be stored in memory, and the effect later played back at a single touch.
1.Use the Jog effect select buttons to select the desired effect.
¶Select from JET, WAH, PHASE SHITER, RING, ZIP, HUMANIZER, or VOCODER.
¶The selected Jog effect button flashes.
¶See page 12 regarding each effect.
2.Set the DIGITAL JOG BREAK lever switch to ON to monitor the effect.
3.Turn the Jog dial while holding down the Jog memory button (M).
Turning the Jog dial while the M button is held down starts memory storage. Effects are stored continues for 8 seconds or until the M button is released. The SINGLE or LOOP button lights.
¶When an effect has already been stored in memory (SINGLE button and LOOP button are lighted), if a new effect is stored in memory, the previously stored contents will be overwritten and the effect data will be erased.
4.Press the SINGLE or LOOP button.
¶When the SINGLE button is pressed, the button flashes and the stored effect produced by the jog dial movement is played back one time.
¶When the LOOP button is pressed, the button flashes and the stored effect produced by the jog dial movement is played back repeatedly. Press the LOOP button once again to stop the effect playback.
¶Jog dial operation stored in memory can be reproduced even when the type of effect is subsequently changed.
<DRB1369>
