02Getting started
•Press SHIFT+MCACC to cancel and revert to the previous Auto MCACC settings.
•If the noise level is too high, NOISY blinks in the display for five seconds. To exit and check the noise levels1, press SHIFT+MCACC, or to try again, press ENTER when RETRY shows in the display.
•If you see an ERR MIC or ERR SP message in the display, there may be a problem with your mic or the speaker connections. To try again, press ENTER when you see RETRY2.
When the MCACC setup is complete, the volume level returns to normal and
Button What it does
Changes the highlighted menu item
ENTER Selects the highlighted menu item
RETURN Returns to the main menu without saving changes
Tip
•The button guide at the bottom of every OSD screen shows you which buttons you’ll need to use for that screen.
COMPLETE3 shows in the display, indicating that the MCACC setup is complete and
Acoustic Calibration EQ has been activated.4
Using the on-screen displays
For ease of use, this system makes extensive use of graphical
All the screens are navigated in basically the same way, using , , , to change the highlighted item and pressing ENTER to select
it.5
Important
•Throughout this manual, ‘Select’ means use the cursor buttons to highlight an item
Button What it does
HOME Displays/exits the
MENU
Playing discs
The basic playback controls for playing DVD, CD, Video CD/Super VCD, DivX video and
1If the player isn’t already on, switch it on. If you’re playing a disc with video, also turn on your TV and make sure that it is set to the correct video input.
2 Press OPEN/CLOSE to load a disc. Load a disc with the label side facing up, using the disc tray guide to align the disc (if you’re loading a
Note
1• If the room environment is not optimal for the Auto MCACC setup (too much ambient noise, echo off the walls, obstacles blocking the speakers from the microphone) the final settings may be incorrect. Check for household appliances (air condition- er, fridge, fan, etc.), that may be affecting the environment and switch them off if necessary.
•Some older TVs may interfere with the operation of the mic. If this seems to be happening, switch off the TV during the Auto MCACC setup.
2If this doesn’t work, press SHIFT+MCACC, turn off the power, and check the problem indicated by the ERR message, then try the Auto MCACC setup again.
3If COMPLETE doesn’t appear, it is likely an error occurred during the setup. Please check all connections and try again.
4See Listening with Acoustic Calibration EQ on page 15 to switch on/off Acoustic Calibration EQ.
5The screen saver will appear after five minutes of inactivity.
10
En
