![](/images/new-backgrounds/1047740/4774029x1.webp)
Listening to your system
Using Advanced Surround
The Advanced Surround effects can be used with any multichannel or stereo source for a
variety of additional surround sound effects.1
TUNE | TEST TONE |
SOUND
RETRIEVER SURROUND ADVANCED SOUND
•Press ADVANCED to select an Advanced Surround mode.
Press repeatedly to select ADVMOVIE,
ADVMUSIC, EXPANDED, TV SURR., SPORTS, GAME, VIRTUAL or 5 STEREO.
Listening in stereo
You can listen to any
TUNE | TEST TONE |
SOUND
RETRIEVER SURROUND ADVANCED SOUND
•Press SURROUND repeatedly until STEREO shows in the display.
Listening with headphones
When headphones are connected, only the STEREO (default) and PHONES SURROUND (virtual surround sound for headphones) modes are available.
•With headphones connected, press ADVANCED to select PHONES SURROUND or SURROUND to select STEREO.
Listening with Acoustic
Calibration EQ
You can listen to sources using the Acoustic Calibration Equalization set in Using the Auto MCACC setup for optimal surround sound on
page 9.2
1 | Press SOUND and use | to select | |
MCACC EQ then press ENTER. |
| ||
2 | Use | to select EQ ON or EQ OFF then | |
press ENTER to confirm. |
|
•If you select EQ OFF, equalization is set to off but speaker settings (channel delay and channel level) remain in effect.
•EQ ON is selected automatically after the Auto MCACC setup is completed.
Using the Sound Retriever
When audio data is removed during the WMA/
•While listening to a stereo source, press SOUND RETRIEVER to switch the sound retriever on or off.
03
English Deutsch Français Italiano Nederlands Español
Note
1Note that when the tuner is selected, multichannel playback is not possible.
2Acoustic Calibration EQ is not available when headphones are connected.
15
En