&RQQHFWLQJ￿WKH￿8QLWV

1RWH￿

•This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a recreational vehicle, truck, or bus, check the battery voltage.

•To avoid shorts in the electrical system, be sure to disconnect the ￿battery cable before beginning installation.

•Secure the wiring with cable clamps or adhesive tape. To protect the wiring, wrap adhesive tape around them where they lie against metal parts.

•Route and secure all wiring so it cannot touch any moving parts, such as the gear shift, handbrake and seat rails. Do not route wiring in places that get hot, such as near the heater outlet. If the insulation of the wiring melts or gets torn, there is a danger of the wiring short-circuiting to the vehicle body.

•Don't pass the yellow lead through a hole into the engine compartment to connect to the battery. This will damage the lead insulation and cause a very dangerous short.

•Do not shorten any leads. If you do, the protection circuit may fail to work when it should.

•Never feed power to other equipment by cutting the insulation of the power supply lead of the unit and tapping into the lead. The current capacity of the lead will be exceeded, causing overheating.

•When replacing fuse, be sure to use only fuse of the rating prescribed on this unit.

•Since a unique BPTL circuit is employed, never wire so the speaker leads are directly grounded or the left and right ￿speaker leads are common.

•The black lead is ground. Please ground this lead separately from the ground of high-current products such as power amps.

If you ground the products together and the ground becomes detached, there is a risk of damage to the products or fire.

•Speakers connected to this unit must be high-power types possessing minimum rating of 40 W and impedance of 4 to 8 ohms. Connecting speakers with output and/or impedance values other than those noted here can damage the speakers.

•When an external power amp is being used with this system, be sure not to connect the blue/white lead to the amp's power terminal. Likewise, do not connect the blue/white lead to the power terminal of the auto-antenna. Such connection could cause excessive current drain and malfunction.

•To prevent incorrect connection, the input side of the IP-BUS connector is blue, and the output side is black. Connect the connectors of the same colors correctly.

•If this unit is installed in a vehicle that does not have an ACC (accessory) position on the ignition switch, the red lead of the unit should be connected to a terminal coupled with ignition switch ON/ OFF operations. If this is not done, the vehicle battery may be drained when you are away from the vehicle for several hours.

O

FF

ACC

O

N

 

S

 

T

 

A

T

R

O

FF

O

N

 

S

 

T

 

A

T

R

ACC position

No ACC position

￿

Page 5 Page 7
Page 6
Image 6
Pioneer KEH-P2830R, KEH-P2800R operation manual RQQHFWLQJWKH8QLWV
Page 5 Page 7

KEH-P2800R, KEH-P2830R specifications

The Pioneer KEH-P2830R and KEH-P2800R are compact car stereo receivers known for their blend of performance, versatility, and user-friendly features. Designed for both casual listeners and audiophiles, these units deliver impressive sound quality and a variety of modern functionalities that enhance the in-car audio experience.

One of the main features of the KEH-P2830R is its high-quality sound processing capabilities. It comes equipped with a built-in MOSFET amplifier that outputs a robust 50 watts per channel, providing clear and powerful audio across various music genres. The receiver also includes a 3-band equalizer, allowing users to fine-tune the sound to match personal preferences and the acoustics of their vehicle.

The KEH-P2800R similarly boasts exceptional sound performance, with a powerful amplification system that guarantees clean and distortion-free audio. With its 24-bit digital-to-analog converter, this model ensures accurate sound reproduction, making every note crisp and precise.

Both units are designed with user convenience in mind. They feature a large, easy-to-read display that provides clear visibility even in bright sunlight. The rotary volume control and well-placed buttons facilitate straightforward operation, ensuring that drivers can adjust settings without distraction.

Connectivity is a key strength of the KEH-P2830R and KEH-P2800R. Each unit features multiple inputs, including USB ports and auxiliary inputs, catering to a variety of audio sources, whether it’s MP3 players, smartphones, or USB flash drives. This flexibility allows users to enjoy their favorite music from different platforms seamlessly.

The KEH-P2830R also supports CD playback and features a built-in AM/FM tuner with 24 presets, making it easy to switch between various radio stations. It also boasts compatibility with CD-R and CD-RW discs, providing even more playback options for listeners.

Both models uphold the Pioneer reputation for durability and aesthetic appeal, with sleek designs that blend well into modern vehicle interiors. Their compact size ensures easy installation in most dashboards, while the robust construction promises longevity, even in demanding environments.

In summary, the Pioneer KEH-P2830R and KEH-P2800R car stereo receivers stand out for their excellent audio quality, user-friendly design, and versatile connectivity options, making them ideal choices for enhancing any driving experience.
Top Page Image Contents