Pioneer P4800MP operation manual Built-in CD Player, Playing a CD, Repeating play

MAN-DEH-P4800MP-GB.fm Page 14 Thursday, September 29, 2005 11:55 AM

Built-in CD Player

Playing a CD

These are the basic steps necessary to play a CD with your built-in CD player. More advanced CD operation is explained starting on this page.

￿ Track number indicator

Shows the track currently playing.

￿ Play time indicator

Shows the elapsed playing time of the current track.

1.Insert a CD into the CD loading slot. Playback will automatically start.

•You can eject a CD by pressing EJECT.

•To avoid a malfunction, make sure that no metal object comes into contact with the terminals when the front panel is open.

2.Use VOLUME to adjust the sound level. Rotate it to increase or decrease the volume.

3.To perform fast forward or reverse, press and hold 4 or 6.

•If you select ROUGH, pressing and holding 4 or 6 enables you to search every 10 tracks in the current disc. (Refer to “Selecting the search method” on page 15.)

4.To skip back or forward to another track, press 4 or 6.

Pressing 6 skips to the start of the next track. Pressing 4 once skips to the start of the current track. Pressing again will skip to the previous track.

Notes

•The built-in CD player plays one standard, 12-cm or 8-cm CD at a time. Do not use an adapter when playing 8-cm CDs.

•Do not insert anything other than a CD into the CD loading slot.

•If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting it again.

•If an error message such as ERROR-11is displayed, refer to “Understanding built-in CD player error messages” on page 31.

•When a CD TEXT disc is inserted, the disc and track titles begin to scroll to the left automatically.

Introduction of advanced built-in CD player operation

￿ Function display

Shows the function status.

￿ RPT indicator

Shows when repeat play is turned on.

*Press FUNCTION to display the function names.

Press FUNCTION repeatedly to switch between the following functions:

RPT (repeat play) – RDM (random play) – SCAN (scan play) – PAUSE (pause) – COMP (compression and BMX) – FF/REV (search method)

• To return to the playback display, press BAND.

Note

•If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display.

Repeating play

Repeat play lets you hear the same track or disc over again.

1.Press FUNCTION to select RPT.

Press FUNCTION until RPT appears in the display.

2.Press 4 or 6 to select the repeat range. This switches you to the selected setting.

•DSC – Repeat the current disc

•TRK – Repeat just the current track

Note

•If you perform track search or fast forward/reverse during TRK, the repeat play range changes to DSC.

14

ENGLISH