Note
Thetuning step remains at 50 kHz during manual
tuning.
Switching Auto PI Seek
Theunit can automatically search for a differ-
entstation with the same programming, even
duringpreset recall.
1 PressFUNCTION to select Auto PI.
PressFUNCTION repeatedly until Auto PI ap-
pearsin the display.
2 Pressaor bto turn Auto PI on or off.
Pressingaor bwill turn Auto PI on or off
andthat status will be displayed (e.g.,
AutoPI : ON).
Switching the warning tone
Ifthe front panel is not detached from the
headunit within five seconds of turning off the
ignition,a warning tone will sound. You can
turnoff the warning tone.
1 PressFUNCTION to select Warning.
PressFUNCTION repeatedly until Warning
appearsin the display.
2 Pressaor bto turn Warning on or off.
Pressingaor bwill turn Warning on or off
andthat status will be displayed (e.g.,
Warning: ON).
Switching the auxiliary setting
Itis possible to use auxiliar y equipment with
thisunit. Activate the auxiliar y setting when
usingauxiliary equipment connected to this
unit.
1 PressFUNCTION to select AUX.
PressFUNCTION repeatedly until AUX ap-
pearsin the display.
2 Pressaor bto turn AUX on or off.
Pressingaor bwill turn AUX on or off and
thatstatus will be displayed (e.g.,
AUX: ON).
Switching the dimmer setting
Toprevent the display from being too bright at
night,the display is automatically dimmed
whenthe car s headlights are turned on. You
canswitch dimmer on or off.
1 PressFUNCTION to select Dimmer.
PressFUNCTION repeatedly until Dimmer ap-
pearsin the display.
2 Pressaor bto turn Dimmer on or off.
Pressingaor bwill turn Dimmer on or off
andthat status will be displayed (e.g.,
Dimmer: ON).
Adjusting the brightness
Youcan adjust the display brightness. Initially
thismode is set to 12.
1 PressFUNCTION to select Brightness.
PressFUNCTION repeatedly until Brightness
appearsin the display.
Initial Settings
En 45
English
Section
10