Pioneer PD-F1039 manual Loading discs into the rack

To remove the discs...

1 Press UNLOAD.

2 Select the number of the disc you want to unload by turning the jog dial or pressing DISC (–/+) on the remote control unit.

• The rack rotates until the selected disc comes to the front of the unit.

3 Remove from the rack.

4 Press OPEN/CLOSE.

• The hood will close.

HOW TO LOAD THE DISCS (Be sure to read this before operation)

Loading discs into the rack

•You can load up to 300 discs in the rack.

The numbers marked on the rack are used as the disc numbers. These are marked in a clockwise order from 1 to 300.

•The following procedure describes how to load discs from disc No. 1.

1Press STANDBY/ON.

STANDBY

STANDBY/ON

2	1	2	3	CHARA	Ensure that the disc No.
		ABC	DEF	TIME/	shown on the display is
	GHI	JKL	MNO	TITLE
	4	5	6	DISPLAY	"1".
	PQRS	TUV	WXYZ	TITLE
	7	8	9	INPUT	If disc number "1" is not displayed,
	DISC	MARK	TRACK	TITLE
	SET	0	SET	SEARCH
					press digit button 1 .

(Carry out step 3 within 5 seconds.)

3	Press UNLOAD.
	UNLOAD
	Ç

	DISC TRACK	MIN SEC
	ALL
	The hood will open.
	When UNLOAD is pressed, the
	hood opens to the disc correspond-
	ing to the disc No. displayed on the
	front of the unit.
4	Load the disc into the
	rack with the label side
	(printed surface) facing to
	the right.

Label side faces right.

(Side to be played faces left.)

Note!!

•Inserting more than one disc into the slot will damage the discs and cause the unit to malfunction.

7	OPEN/	Press OPEN/CLOSE.
	CLOSE	The hood will close.
		When the hood closes, the rack is
		revolved once for disc detection
		(disc loaded/not loaded detection
		function).

Tip:

Difference between OPEN/CLOSE and UNLOAD OPEN/CLOSE: The hood is simply opened or closed.

UNLOAD: The slot corresponding to the disc No. being displayed rotates to the center position then the hood is opened.

Notes!!

•Do not attempt to open the hood with your hand.

•Be careful not to pinch your fingers when opening and closing the hood.

•If PLAY operation (PLAY, BEST, Hi-LITE, PREVIOUS) is carried out before disc detection finishes, PLAY operation will pro- ceeded to without detection. In this case, detection will operate after PLAY is finished. Detection may not function properly depending on the color or shape etc., of the disc.

WARNING:

Do not put your hand or any other object inside the rack, otherwise injury or part damage may result.

CDFILE

• While changing or inserting discs, be careful not to press

any buttons on the main unit or the remote control. The

rack may move suddenly, and then your fingers may be

caught between discs and the side of door.

• When changing or inserting discs, make sure the rack is

stopped. Do not attempt to put a disc in when the rack is

moving.

• Do not put anything other than CDs inside the rack.

• Load only one disc into each disc slot.

• Do not apply force to the rack. This can cause a malfunction.

• 8-cm (3-in.) discs cannot be played as they are. First attach the

8-cm (3-in.) disc adapter to each 8-cm (3-in.) disc and load them

together in the player.

• Never start playback by placing the 8-cm (3-in.) disc adapter

alone, without attaching it to a disc.

• The unit will not operate if the hood is opened during playback.

Be sure to close the hood before attempting any operation.

• To load or remove a disc in or from the slot which is seen

5 DISC/ PUSH ENTER

CHARA

Turn the jog dial clock- wise to rotate the rack.

When the jog dial is turned clockwise, the rack turns in the direction in which the disc number increases (1, 2, 3 ...).

When turned counterclockwise, the rack turns in the opposite direction.

through the hood, press OPEN/CLOSE. The hood is opened,

“HOLD” is displayed and the disc can be loaded in or ejected

from the slot seen through the hood. Even while “HOLD” is

being displayed, the rack can be rotated by pressing DISC (–/+).

6 Load other discs into the rack by repeat- ing steps 4 and 5 for each of them.

10