Pioneer PDP-42A3HD If you select PIP in the step, Upper left Upper right Bottom left Bottom right

Basic Operations 06

4Select PIP/Twin Mode and press the \ or OK button again.

5Press the c or d button to select the required option as follows, then press the [ or the BACK button.

Off - PIP - Twin1 - Twin2

PIP/TWIN

PIP/Twin Mode	PIP	Off
PIP/Twin Input	Digital TV
		PIP
PIP Position		Twin1

Twin2

AdjustReturn

• If you set to Off, the following steps are not available.

6Press the c or d button to move to PIP/Twin Input, then press the \ or OK button.

7Press the c or d button to select the required input source as follows, then press [ or the BACK button.

DIGITAL CH - ANALOG CH - VIDEO 1 - VIDEO 2 - VIDEO 3 - S-VIDEO 1 - S-VIDEO 2 - S-VIDEO 3 -

COMPONENT 1 - COMPONENT 2 - HDMI

PIP/TWIN		DIGITAL CH
PIP/Twin Mode	PIP	ANALOG CH
PIP/Twin Input	DIGITAL CH	VIDEO 1
PIP Position		VIDEO 2
		VIDEO 3
		S-VIDEO 1
		S-VIDEO 2
		S-VIDEO 3
		COMPONENT 1
		COMOPNENT 2
		HDMI
Adjust	Return

•You can select the modes by simply pressing the SPLIT button on the remote control.

•You can select the sources by simply pressing the SPLIT INPUT button on the remote control.

•In Twin or PIP mode, press the SWAP button to switch the position of the 2- screen shown.

If you select “PIP” in the step 5

You can select the position of picture in picture display.

Press the c or d button to move to PIP Position, then press the \ or OK button.

PIP/TWIN

PIP/Twin Mode	PIP
PIP/Twin Input	Digital TV
PIP Position

Adjust Return

(Upper left) (Upper right)

(Bottom left) (Bottom right)

•You can select the positions by simply pressing the SHIFT button on the remote control.

8Press the c or d button to select the required position for the sub-picture, then press the [ or BACK button.

9Press the EXIT button.

•Multi screen function is available with the following combina- tions:

DIGITAL CH - ANALOG CH

DIGITAL CH/ANALOG CH - VIDEO1/2/3, S-VIDEO1/2/3, COMPONENT1/2 or HDMI

English

23

En

07-PDP42A3HD-Eng (19-23) 23 05.4.20, 4:30 PM