11 Appendix
Appendix
Troubleshooting
Problem | Possible Solution |
• No power. | • Make sure the Plasma Display is connected correctly. (See page 18.) |
| • Is the power cord disconnected? (See page 18.) |
| • Has the power been turned on? (See page 19.) |
| • Check if you pressed TV on the remote control unit. (See page 19.) |
| If the STANDBY indicator on the Plasma Display lights up red, press TV . |
|
|
• No picture or sound | • Check if the power cord is connected correctly. |
| • Check that you have pressed the TV on the remote control or the STANDBY/ON botton on the |
| Plasma Display. |
| • Select an input source responding to that particular source. |
| • Check the picture contrast and brightness settings. |
| • Check the volume. |
|
|
• Normal picture but no sound | • Check the volume. |
| • Check whether the MUTING button on the remote control has been pressed. |
|
|
• No picture or black and white | • Adjust the color settings. |
picture | • Check that the correct broadcast system is selected. |
|
|
• Sound and picture interference | • Try to identify the electrical appliance that is affecting the Plasma Display, then move it further away. |
| • Plug the Plasma Display into a different wall outlet. |
|
|
• Blurred or snowy picture, distorted | • Check the direction, location and connections of your aerial. Such interference often occurs due to |
sound | the use of an indoor aerial. |
|
|
• Remote control malfunctions | • Press the INPUT button to select the Plasma Display or an external device. |
| • Replace the batteries in the remote control. |
| • Install batteries ensuring that the <+> and – ends of the batteries are inserted correctly. |
| • Check the angle and distance of the remote control to the Plasma Display. Make sure there are no |
| obstacles between the remote control and the Plasma Display. |
| • Check that the correct function button has been pressed. |
| • Change the location of light sources or the direction of the Plasma Display to avoid glare. |
|
|
11
English
43
En
43 | 05.4.20, 4:32 PM |