Pioneer PDR-609 operating instructions Understanding display messages, Additional information

7 Additional information

Understanding display messages

Below is a list of messages you’ll see during normal operation of the PDR–609 together with a brief explanation of what they mean. If you need more information, turn to the page indicated.

Note: In the table below, ** indicates a track number.

Message	Description	Reference
TOC READ	The recorder is reading the disc's TOC (Table of Contents). Wait for the message to	p. 15
	disappear.
SYNCÐ1	The unit is in 1-track automatic digital recording mode. Recording starts when the	p. 19
	recorder detects the digital source input signal.
SYNCÐALL	The unit is in all-track automatic digital recording mode. Recording starts when the	p. 20
	recorder detects the digital source input signal.
PMA REC	The recorder is writing TOC data to the disc's PMA (Program Memory Area). Never
	turn off the power while this display is showing.
** SKIP SET	Confirm that you want to set a skip ID by pressing the SKIP ID SET button.	p. 29

**SKIP CLR Confirm that you want to set a skip ID by pressing the SKIP ID CLEAR button. p. 29

ERASE LAST?	Confirm that you want to erase the last track of a CD-RW disc by pressing 6 (8	p. 37
	on the remote control).
ERASE ALL?	Confirm that you want to erase all tracks on a CD-RW disc by pressing 6 (8 on	p. 37
	the remote control).
ERASE TOC?	Confirm that you want to erase the TOC of a finalized CD-RW disc to return it to a	p. 38
	non-finalized state. After doing this, you can record more material on the disc.
ERASE ** Ð ** ?	Confirm that you want to erase tracks recorded on a CD-RW disc .	p. 37
INITIALIZE?	Confirm that you want to re-initialize the CD-RW disc by pressing 6 (8 on the	p. 38
	remote control).

English

39

En