Denon AVR-2803/983 manual Multi Zone Music Entertainment System

MULTI ZONE MUSIC ENTERTAINMENT SYSTEM

•When the outputs of the "ZONE 2" OUT terminals are wired and connected to integrated ampfifiers installed in other rooms, different sources can be played in rooms other than the main zone in which this unit and the playback devices are installed. (Refer to ZONE 2 on the diagram below.)

•ZONE 2 SPEAKER OUT can be used when "ZONE2" is selected at System Setup Menu "Power Amp Assignment". In this case, Surround Back Speaker Out cannot be used for MAIN ZONE. (See page 25.)

•When a sold separately room to-room remote control unit (DENON RC-616, 6t7 or 618) is wired and connected between the MAIN ZONE and ZONE 2, the remote-controllable devices in the main zone can be controlled from ZONE 2 using the remote control unit.

To control playback devices other than the ones above, either use that device's remote control unit or preset a separately sold programmable remote control unit.

NOTES:

•For the AUDIO output, use high quality pin-plug cords and wire in such a way that there is no humming or noise.

•For instructions on installation and operation of separately sold devices, refer to the devices' operating instructions.

•MULTI ZONE MUSIC ENTERTAINMENT SYSTEM (When using PREOUT}

ZONE 2 MAIN ZONE

				ROOM_OROOMREMOTE	CONTROL SYSTEM
_NTEGRATED	,_			(sepatatelysold)controlline
		AVR-2803
AMPLIFIER	ttN'			ZONE2 AUD_Qsignal came
PROGRAMMABLE	I_		--	SPEAKER cable
REMOTE	._,"	/N a
CONTROL UNiT
				Refer to CONNECTIONS on pages 6 to 13
	Re-6_6	CONTROL	UNIT RC 924
		SYSTEM	REMOTE

• MULTI ZONE MUSIC ENTERTAINMENT SYSTEM (When using SPEAKER OUT)

ZONE 2 MAIN ZONE

			m	......	ROOM_O	ROOM REMOTE CONTROL SYSTEM
					(separately	sold) control line
	,N'	AVR-2803			ZONE2 SPEAKER cable
		_f
				--	SPEAKER	cable
REMOTE	I_
PROGRAMMABLE
CONTROL UNIT
		SYSTEM	REMOTE		Refer to CONNECTIONS on pages 6 to 13
	RG_16	CONTROL	UNIT RC 924

48