Denon AVR-2803/983 manual e_TiN, STEREO mode

Models: AVR-2803/983

1 76
Download 76 pages 26.6 Kb
Page 44
Image 44
e_TiN.

1

Set the external input (EXT.

 

 

 

 

 

t

IN) mode.

 

 

e_TiN.

 

 

 

 

 

 

Press the

EXT. IN to

switch

L_L

 

 

 

 

 

 

the external input.

 

t.\

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

{30O0

 

= •

 

 

 

 

{Mafn unit)

(Remote

control unft)

 

 

 

 

 

 

 

 

 

 

f E

Q

_

 

Once this is selected, the input signals connected to the FL

D

 

 

 

 

 

{front left),

FR (front

right),

C {center), SL {surround

left), SR

 

 

 

 

{surround right), SBL {surround back left) and SBR {surround

 

 

 

 

 

back right)

channels

of the

EXT. iN jacks are output

directly to

 

 

 

2 1

 

the front (left and right), center, surround {left and right) and

 

 

 

 

 

surround back (left and right) speaker systems as well as the

 

 

 

 

 

pre-out jacks without passing through the surround circuitry.

 

 

 

 

 

in addition, the signal input to the SW (subwoofer) jack is

 

 

 

 

 

output to the PRE OUT SUBWOOFER jack.

 

 

 

 

 

 

2

Cancelling the external input mode

 

 

 

 

 

 

To cancel

the external input

(EXT. IN) setting,

press

the input

 

 

 

 

 

mode (AUTO, PCM, DTS) or ANALOG button to switch to the

 

 

 

 

 

desired input mode. (See page 42.)

 

 

 

 

 

 

 

MODE

ANALOG

 

 

 

 

 

 

 

(Maln unft)

(Remote control unft)

When the input mode is set to the external input (EXT. IN), the surround mode (DIRECT, STEREO, DOLBY/DTS SURROUND, 5/7CH STEREO or DSP SIMULATION) cannot be set.

NOTES:

In play modes other than the external input mode, the signals connected to these jacks cannot be played. In addition, signals cannot be output from channels not connected to the input jacks.

The external input mode can be set for any input source. To watch video while listening to sound, select the input source to which the video signal is connected, then set this mode.

The AVR-2803/983 is equipped with two 2-channel playback modes exclusively for music. Select the mode to suit your tastes.

1

DIRECT

mode

 

 

 

 

meecx

Use this

mode to

achieve good

quality 2-

 

 

channel sound while watching images, in

 

 

this mode, the audio signals bypass such

 

 

circuits

as

the

tone

circuit

and

are

 

 

transmitted

directly,

resulting

in

good (Remotecontrolunft)

 

quality sound.

 

 

 

 

 

 

 

STEREO mode

 

 

 

81_nEO

 

 

 

 

 

 

 

Use this mode to adjust the tone and

 

 

achieve the desired sound while watching

 

 

images.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Remote

control unit)

44

Page 44
Image 44
Denon AVR-2803/983 manual e_TiN, STEREO mode