Denon AVR-2803/983 manual Speaker ConfiEuration, Configuration, Surround, Center Subwoofer Sp, Ba

•Set up in function of your speaker systems. Performing this setup optimizes the system.

•The composition of the signals output to the different channels and the frequency response are adjusted automatically according to the combination of speakers actually being used.

1	At the System Setup Menu select "Speaker Configuration".		Setup Menu
	System
	7Speaker		Configuration
	Delay	Time
	Channel		Level
	Digital		In Assignment
	Video	In	Assignment

Dolby DlKital Setup

Zone2 Control

_,_	Switchtothespeakerconfigurationscreen.
	Set whether or not speakers are				Speaker	ConfiEuration		"Speaker		Configuration
	connected and, if so, their size
	parameters.					_Front	Sp.			Surround
	•	To select	the	speaker		Center	Sp.	_		_s_;_
						Subwoofer				Sp, Ba_	[_
G	•	To select	the	parameter				Center	Sp
								Front	Sp
								Subwoofer
								Surround	Sp
								Surround back	Sp

Press the ENTER button to finalize the setting.

NOTE:	I
Select "Large" or "Small" not according to the actual size of the speaker but according to the speaker's capacity for playing low frequency
(bass sound below frequency set for the Crossover Frequency mode and below) signals. If you do not know, try comparing the sound at both
sett ngs sett ng the vo ume to a eve ow enough so as not to damage the speakers to determ ne the proper sett rig.

•Parameters

Large ................... Select this when using speakers that have sufficient performance for reproducing bass sound below the frequency set for the

	Crossover				Frequency mode.
Small	Select			this	when using speakers that do not			have sufficient	performance for	reproducing bass sound below the frequency set
	for the Crossover Frequency mode. When this is set, bass sound with a frequency below the frequency set for the Crossover
	Frequency mode is sent to the subwoofer.
	When		this		setting	is selected,	low frequencies of below		the frequency set	for the Crossover Frequency mode are assigned
	to	the	subwoofer.
None	Select			this	when	no speakers	are installed.
Yes/No	Select			"Yes" when a subwoofer is installed,				"No" when	a subwoofer is not	installed.
2spkrs/lspkr	Set	the		number of speakers to be used for				the surround back channel.

If the subwoofer has sufficient low frequency playback capacity, good sound can be achieved even when "Small" is set for the front, center and surround speakers.

For the majority of speaker system configurations, using the Small setting for all five main speakers and Subwooofer On with a connected subwoofer will yield the best results.

18