Denon AVR-2803/983 manual Auto Surround Mode

The surround mode used at last for the three types of input signals shown below is stored in the memory, with that surround mode the next time it is input.

Note that the surround mode setting is also stored separately for the different input sources.

_	Analog and PCM 2-channel signals
_2_ 2-channel signals of Dolby Digital, DTS or other multi-channel format
_3_ Multi-channel signals of Dolby Digital, DTS or other multi-channel format
1	At the System Setup Menu select "Auto Surround
	Mode" and press the ENTER button.

and the signal is automatically played

System Setup Menu

Ext. In Subw00ferLevel

_Auto Surround Mode

On Screen Display

Trigger Out Setup

Auto Tuner Presets

Setup Lock

Select "ON" if you	want to use the auto surround mode, "OFF" if you
do not want to use	it.	Auto Surround Mode

2

Enter the setting.

The System Setup Menu reappears.

•Use this to turn the on-screen display {messages other than the menu screens) on or off.

At the System Setup Menu select "On Screen Display"

and press the ENTER button.

System Setup Menu

1

2

Ext. In SubwooferLevel

Auto Surround Mode

70n Screen Display

Trigger Out Setup

Auto Tuner Presets

Setup Lock

Select "ON" or "OFF".

On Screen Display

m_ : _[_

The System Setup Menu reappears.

Enter the setting.

27