Denon AVR-2803/983 manual Ol, 13 2 4,5 2,6

1 Select the input source.

[ Playback with a digital input I

_ Select an input source set to digital (COAXIAL/OPTICAL) (see page 23).

_ur_T'°_VDp

(Main unit} (Remote control unit)

_2_Set the input mode to "AUTO" or "DTS".

_E

(Main unit) (Remote control unit)

2 Select the Dolby/DTS Surround mode.

SU_ND

(Remote control unit}

When performing this operation from the main unit's panel, press the SURROUND MODE button, then turn the SELECT knob and select Dolby Pro logic 11or DTS NEO:6.

81jRF_4j_	SELECT
MODE

(Main unit)(Main unit)

Ill I_----q	,	_	mark.
Play a program source with the O===TAL

13

_OL '"

_°_° _

13 2 4,5 2,6

m=

8 86

UU _etTAL

_Cr_ Light

_Light

SIGNAL

DE_ECT

_Cr_ Light

•The Dolby Digita] indicator lights when playing Dolby Digital sources.

•The DTS indicator lights when playing DTS sources.

The SIGNAL DETECT LED lights

when playing 6.1-channel surround sources containing the identification signal.

When the SIGNAL DETECT LED is lit, we recommend

turning the surround back channel using the SURROUND BACK button on the remote control unit and main unit

during playback.

To use DTS 96/24 sources with the optimum system, we recommend turning the surround back channel off.

Operate the SURROUND BACK button to switch Surround Back CH ON/OFF.

SUI:IROZJNDBi_K8URJIOUND

	(Main unit)	(Remote control	unit)
SURROUND
8ACKCH		• Lights when the Surround	Back CH is
OUTPUT
_l_		on.
_O,	Light

53