Denon AVR-2803/983 manual 2,42, Status, Using the dimmer function, E:.L..,L.. L.._, Notes

[5] Checking the currently playing program source, etc.

1 On screen display

•Each time an operation is performed,

a description of that operation appears on the display connected to

the unit's VIDEO MONITOR OUT ONSCF_EN jack. ALSO,the unit's operating status

can be checked during playback by pressing the remote control unit's ON SCREEN/DISPLAY button.

Such information as the position of the input selector and the surround

parameter settings is output in sequence.

Front panel display

•Descriptions of the unit's operations

are also displayed on the front panel display. In addition, the display can be

switched to check the unit's operating status while playing a source by pressing the STATUS button.

{Remote cohtro_ urfit)

STATUS

L_.

{Main unit)

Using the dimmer function DIMMER

•Use this to change the brightness of the display. The display brightness changes in four steps (bright, medium, dim and off) by pressing the main unit's DIMMER button repeatedly.

(Main unit}

[1] Playing one source while recording another (REC OUT mode)

1	Press	the ZONE2/REC button.				ZONE 2
						/REC
						%
						{Main	unit)
2	With	"RECOUT	SOURCE"	displayed,
	source you wish to record.
	• The	"REC"	indicator	and	the
	turn the FUNCTION knob to			select	the	_0	_
	indicator of the selected source
	light.
						{Main	unit}

Set the recording mode.

•For operating instructions, refer to the manual of the component on which you want to record.

To cancel, turn the function knob and select "SOURCE".

• When "SOURCE" is selected, the "REC" indicator turns off.

F _cTI_

(Ivla_n unitl

2,42

I

1

Display2

[":.E:.L..,L.. L.._ i .:::,L.. L.._[":.L..,E:.

NOTES:

•Recording sources other than digital inputs selected in the REC OUT mode are also output to the Zone 2 preout jacks.

•Digital signals are not output from the REC SOURCE or audio output jacks.

46