Denon AVR-2803/983 manual Sbl, Sbr, Etsl

Set the distance between the

center speaker and listening position.

The distance changes in units of 1 foot (0.1 meters) each time the

button _s pressed. Select the value closest to the measured distance.

Delay Time		Delay	Time
Default		[_4
			SR	1Oft
, Front	R	12ft	SBL	1Oft
,_Center	L	<12ft_	SBR	1Oft
Front		12ft	ETSL	<10ft_

Example:When the distanceis setto 12 feet

forthe centerspeaker

If "Yes" is selected for "Default", the settings are automatically reset to the default values.

Please note that the difference of distance for every speaker should be 20 ft (6.0 m} or less. If you set an invalid distance, a CAUTION notice, such as screen right will appear. In this case, please relocate the blinking speaker(s) so that its distance is no larger than the value shown in highlighted line.

Default [_4

Front R 12ft

Center lft B'Front111tflL DNilI!12ft

	The	System Setup	Menu reappears.
__\	The	AVR-2803/983	automatically sets the optimum surround delay time for the listening room.
	Enter the setting.

NOTE:

•If the distance unit is changed after the delay time is set, the settings are reset to the factory default values (see page 16, 17}.

•Use this setting to adjust so that the playback level between the different channels is equal.

•From the listening position, listen to the test tones produced from the speakers to adjust the level.

•The level can also be adjusted directly from the remote control unit. (For details, see page 49.)

1	At the System Setup Menu select "Channel Level".		Setup Menu
	System
	Speaker		Configuration
	Delay	Time
	_Channe	I	Level
	Digital		In Assignment

Video In Assignment

Dolby DiKital Setul0

Zone2 Control

Switch to the Channel Level screen.

Channel Level

_Test Tone _4:_

Test Tone Start [_<

Level Clear [_4

Select "Test Tone".

21