Denon AVR-2803/983 manual Example CD, 8OUROE ZONE2/REC, Mode selection Function, Auto PCM DTS

15

o o o o

1

2

_ o o o = .

I

23

Select the input source to be played.

Example: CD

(Main

unit)

(Remote

control

unit)

-_ To select

the

input

source

when

8OUROE

ZONE2/REC

OUT or TUNING

Input

mode selection

function

PRESET is selected, press the

Different input modes can be selected for the different input sources.

SOURCE button then operate the

The selected input modes for the separate input sources are stored in

input function

selector.

(Main

unit)

the memory.

(_ AUTO (auto mode)

Select the input

mode.

in

this

mode, the types of signals being input to the digital

and

• Selecting

the

analog

mode

analog

input jacks for the selected

input

source are detected

and

Press the

ANALOG

button

to switch

to the analog input.

the

program

in the

AVR-2803/983'S surround

decoder

is selected

-

%

automatically upon playback. This mode can be selected for all

input sources other than PHONO and TUNER.

The presence or absence of digital signals is detected, the signals

input

to the

digital

input jacks

are identified

and decoding

and

(Main

unit)

(Remote

control

unit)

playback are performed automatically in DTS, Dolby Digital or PCM

(2 channel stereo) format. If no digital signal is being input, the

• Selecting the external input (EXT. IN) mode

analog input jacks are selected.

Press the EXT. IN (on the EXT. IN button on the remote

Use this mode to play Dolby Digital signals.

control unit)

to switch the external input.

_) PCM (exclusive PCM signal playback mode)

%

Per.

IN

Decoding and playback are only performed when PCM signals are

being

input.

Note that noise may be generated when using this mode to play

signals other than PCM signals.

(Main

unit)

(Remote

control

unit)

(_ DTS (exclusive DTS

signal playback

mode)

• Selecting the AUTO, PCM and DTS modes

Decoding and playback are only performed when DTS signals are

being

input.

The mode switches as shown below each time the INPUT

MODE button

is pressed.

(_ ANALOG (exclusive analog audio signal playback mode)

AUTO_

PCM _

DTS

The signals input to the analog input jacks are played.

_) EXT. IN (external decoder input jack selection mode)

The signals being input to the external decoder input jacks are

%

played without passing through the surround circuitry.

MC_E

NOTE:

• Note that noise will be output when CDs or LDs recorded in DTS

format

are played in the "PCM"

{exclusive

PCM signal

playback}

or

(Main

unit)

(Remote

control

unit)

"ANALOG" (exclusive PCM signal playback) mode. Select the

AUTO or DTS mode when playing signals recorded in DTS from a

laser disc player or CD player.

Note on playing a source encoded with DTS

• Noise may be generated at the beginning of playback and while searching during DTS playback in the AUTO mode. If so, play in the DTS mode.

42